This dialog box enables you to define the relevant settings in order to enable the LoadRunner agent on Windows machines.
Perform the following steps on the LoadRunner machine:
The Network and Security Manager configuration tool provides greater flexibility for defining the agent settings through the command line. For details, see Network and Security Manager - Command Line Tool.
User interface elements are described below:
|MI Listener Name||
The name, full name, or IP address of the MI Listener.
|Local Machine Key||
A symbolic string identifier used to establish a unique connection between the Controller host and the agent machine, via the MI Listener machine.
|Connection Timeout (seconds)||
The length of time you want the agent to wait before retrying to connect to the MI Listener machine. If zero, the connection is kept open from the time the agent is run.
Default value: 20 seconds
|MI Listener User Name||
The user name needed to connect to the MI Listener machine.
|MI Listener Password||
The password needed to connect to the MI Listener machine.
The domain name needed to connect to the MI Listener machine. This field is required only if NTLM is used.
|Connection Type - TCP/HTTP||
Select either TCP or HTTP, depending on the configuration you are using.
|Connection Type - HTTP Proxy Name||
The name of the proxy server. This field is mandatory if the Connection Type setting is HTTP.
|Connection Type - HTTP Proxy Port||
The proxy server connection port. This field is mandatory if the Connection Type setting is HTTP.
|Connection Type - HTTP Proxy User Name||
The user name of a user with connection rights to the proxy server.
|Connection Type - HTTP Proxy Password||
The password of the user with connection rights to the proxy server.
|Connection Type - HTTP Proxy Domain||
The user's domain if defined in the proxy server configuration. This option is required only if NTLM is used.
|Use Secure Connection (SSL)||
Enable to connect using the Secure Sockets Layer protocol.
|Use Secure Connection (SSL) - Check Server Certificates||
Authenticates the SSL certificates that are sent by the server. Select Medium to verify that the server certificate is signed by a trusted Certification Authority. Select High to verify that the sender IP matches the certificate information. This setting is available only if Use Secure Connection is enabled.
|Use Secure Connection (SSL) - Private Key Password||
The password that might be required during the SSL certificate authentication process. This option is relevant only if the Client Certificate Owner option is enabled.