Messages 27241 Through 27260

Message Code 27241

Not enough OS_ALLOCA memory ('allocation request size in bytes') for host name

Insufficient memory for performing an operation.

Troubleshooting

• Check the machine's memory resources, and close any unnecessary processes running on the machine.
• Restart the computer and replay the script again.
• If the problem persists, reduce the number of virtual users that you are running on the same machine.

Message Code 27242

Host name is empty

The "hostname" argument specified in web_set_user must be denoted by a non-empty string.

Troubleshooting

• Check that the third argument in the web_set_user function is specified in the format "host:port" or "host". The host must be a non-empty string. The port must be either:

  • specified as a positive number greater than 0
  • unspecified (in which case the default port will be used)

Message Code 27243

Invalid port

The port specified in web_set_user is invalid. The port (if specified), should be a positive value greater than 0.

Troubleshooting

• Check that the third argument in the web_set_user function is specified in the format "host:port" or "host". If the port is not specified (i.e., there is no "port" in the argument), the default port is used.
• If the port is specified, verify that the port is a positive number greater than 0.

Message Code 27244

web_concurrent_start detected within a concurrent group. A previous web_concurrent_end may be missing

The error occurs when no web_concurrent_end call is found before the consequent web_concurrent_start call. A concurrent group cannot exist within another concurrent group.

Troubleshooting

• Split the nested concurrent group by adding the web_concurrent_end call before the consequent web_concurrent_start call, or
• Delete the nested web_concurrent_start call from the script.

Message Code 27245

web_concurrent_end without a prior web_concurrent_start

There is no corresponding web_concurrent_start for the web_concurrent_end call.

Troubleshooting

Try one of the following:

• Add the web_concurrent_start function before the call to the web_concurrent_end
• Delete the offending call to web_concurrent_end from the script

Message Code 27246

Function not allowed within a concurrent group

The offending function cannot be run within a concurrent group.

Troubleshooting

• Move the function outside the concurrent group.

Message Code 27247

Invalid proxy port

The proxy port specified in web_set_proxy is invalid. The proxy port (if specified), should be a positive value greater than 0.

Troubleshooting

• Check that the first argument in the web_set_proxy function is specified in the format proxy_host:port or proxy_host. If no port is defined in the first argument, the default proxy port is used.
• If the port is specified, verify that the port is a positive number greater than 0.

Message Code 27248

Parameter_SaveString failed (rc='return value') for 'parameter'

Unable to save the specified parameter.

Troubleshooting

• Check that the parameter length is within a valid range. For more information on parameter ranges, refer to the Function Reference.

Message Code 27251

Parameter_SaveString failed (rc='return code') when emptying 'parameter'

Unable to save the specified parameter.

Troubleshooting

• Check that the parameter length is within a valid range. For more information on parameter ranges, refer to the Function Reference.

Message Code 27252

Invalid ordinal

The "Ordinal" (or "Ord") argument cannot have a value of less than, or equal to 0.

Troubleshooting

• Enter an "Ordinal" argument value that is greater than 0.

Message Code 27253

Invalid left and/or right boundary

The left and/or right boundary arguments are NULL.

Troubleshooting

• Provide a non-NULL string for the left and/or right boundary arguments.

Message Code 27254

Parameter name is NULL or empty

The parameter name must be denoted by a non-empty string.

Troubleshooting

• Provide a non-empty string for the parameter name argument.

Message Code 27255

Header value is NULL

The header name value must be denoted by a non-empty string.

Troubleshooting

• Provide a non-empty string for the header name value.

Message Code 27256

Header name is NULL or empty

The header name must be denoted by a non-empty string.

Troubleshooting

• Provide a non-empty string for the header name argument.

Message Code 27257

Pending web_reg_save_param/reg_find/create_html_param[_ex] request(s) detected and reset at the end of iteration number 'iteration number'

The specified iteration number ended, but there are still active web_reg_save_param/ reg_find / create_html_param[_ex] requests that were not performed during the iteration.

Troubleshooting

• Check which requests were not performed. If an unperformed request is not critical, delete it from the script.
• If an unperformed request is critical, contact customer support.

Message Code 27258

Pending web_reg_save_param/reg_find/create_html_param[_ex] request(s) detected and reset at the end of the virtual user

The Virtual User run ended, but there are still active web_reg_save_param / reg_find / create_html_param[_ex] requests that were not performed during replay.

Troubleshooting

• Check which requests were not performed. If an unperformed request is not critical, delete it from the script.
• If an unperformed request is critical, contact customer support.

Message Code 27259

Pending web_reg_save_param/reg_find/create_html_param[_ex] request(s) detected and reset at the end of the Init section

The Init section ended, but there are still active web_reg_save_param / reg_find / create_html_param[_ex] requests that were not performed during the Init Section.

Troubleshooting

• Check which requests were not performed. If an unperformed request is not critical, include "Resource=1" in one of its parameters, or delete the unperformed request from the script.
• If an unperformed request is critical, contact customer support.

Message Code 27260

Pending concurrent group detected and reset at the end of iteration number 'iteration number'

The specified iteration number ended, but a section of the script that includes the web_start_concurrent_group call is missing the web_end_concurrent_group call. The pending concurrent group is reset.

Troubleshooting

• Add the web_end_concurrent_group call to the relevant section in the script.