Citrix server monitor

Use this monitor to measure statistics related to the Citrix MetaFrame XP server during the performance test run, enabling you to watch server loading for performance, availability, and capacity planning.

Set up the Citrix monitoring environment

This task describes how to set up the monitoring environment for the Citrix MetaFrame monitor.

  1. Prerequisites

    • Make sure that Citrix Server has been installed and is running.

    • If Citrix Server machine is running Windows 2000, make sure that the server machine is also running the Remote Registry service.

    • If your monitor accesses a server outside of your internal network, you may need to set up a web proxy to collect data from it. For details, see Prerequisites.

    • Measurements that monitor instances are valid for the currently running Citrix session only. If you run this test again, you will need to reconfigure the measurements that are instance-oriented.

    • To monitor the different instances, ensure that the server login and logout procedures are recorded in the Vuser_init and Vuser_end sections respectively, and not in the Action section of the script. For details, see the Virtual User Generator Help Center.

  2. Map the Network Drive

    From the Controller machine, map a network drive to the Citrix server machine. This ensures that the required authentication is provided to the Controller to access the resource counters.

  3. Launch PerfMon

    Launch PerfMon from the Controller machine to enable the counters on the Citrix server. This allows you to monitor the same counters for the ICA Session object on the Citrix monitor.

  4. Open the Connection with the Citrix Server

    You can configure the Citrix monitor to view ICA Session object counters only if at least one session is being run on the Citrix server. If no "real" user has opened a connection with the Citrix server, you need to first initialize or run a Citrix Vuser against the server, and only then configure the Citrix Monitor and add the ICA Session counters. If you configure the Citrix monitor without first initializing or running a Citrix Vuser (or connecting to the Citrix server as a "real" user), you will not be able to view the ICA Session object.

  5. Configure the Citrix monitor as described in Configure the Citrix MetaFrame monitor.

Back to top

Configure the Citrix MetaFrame monitor

This task describes how to configure the Citrix MetaFrame monitor.

  1. From the LoadRunner Enterprise navigation toolbar, click and select Monitors (under Assets).

  2. In the test resource tree, select an existing monitor profile, or click New Monitor Profile and create a new monitor profile.

  3. In the Monitor Profile page, click Add Monitor and select Citrix Server.

  4. In the Citrix Server page, enter the server details:

    UI Elements



    The name or IP address of the server whose resources you want to monitor.

    User Name

    The monitored server's user name, if relevant.


    The monitored server's password, if relevant.

  5. Click Get Counters to display a list of available metrics and counters, and select the relevant measurements that you want to monitor.

    The following sections describe some of the counters that can be measured.

Back to top

See also: