SiteScope monitor
This section explains how to use the SiteScope monitor.
In this topic:
About SiteScope monitoring
The SiteScope monitor graph shows the SiteScope resources measured during the test run. The SiteScope monitor can measure server, network, and processor performance counters.
For detailed information on the performance counters that SiteScope can monitor, refer to the relevant SiteScope documentation available from the Software Documentation Portal at https://docs.microfocus.com/.
Set up the SiteScope monitor
This task describes how to set up the SiteScope monitor in LoadRunner Enterprise 2021 R2.
Note: For details on setting up the monitor in LoadRunner Enterprise 2021 and 2021 R1, see Set up the SiteScope monitor (2021 and 2021 R1).
-
Prerequisites
-
Before setting up the SiteScope monitor, ensure that SiteScope has been installed on a server.
-
You can install SiteScope on the same machine as the Controller, or on a dedicated server. If SiteScope is installed on a machine other than the Controller, verify that the SiteScope machine is accessible from the Controller machine.
-
If your monitor accesses a server outside of your internal network, you may need to set up a web proxy to collect data from it. For details, see Use a proxy server.
-
-
Select a resources folder
Select a resources folder for the monitor profile in the resources tree, or create a new folder as follows:
-
From the LoadRunner Enterprise navigation toolbar, click
and select Monitors (under Assets).
-
Click
New Folder and enter a name for the monitor resources folder.
-
-
Select an existing monitor profile, or create a new profile as follows:
-
Click
New Monitor Profile, and make sure Monitor Profile is selected.
-
Enter a name and optional description for the monitor profile, and click Save. An empty monitor profile is added to the selected resources folder.
-
-
Add a monitor to the profile
-
Select the monitor profile you just created and click
New Monitor.
-
Select the SiteScope monitor type.
-
Click Next and enter the server details:
-
Click Get Counters to display a list of available metrics and counters per metric from the selected SiteScope application.
Select the measurements that you want to monitor, and then click
to add the counters to the Selected Counters table.
-
Click Save. The monitor details are displayed in the Monitors tab for the selected monitor profile.
-
-
Associate the monitor with your test
For details, see Step 4: Associate monitors with your test.
See also: