View and manage devices
Click DEVICE LAB>DEVICES to display the devices in the Lab.
- Administrators will see all the devices that have been connected to Mobile Center. An admin user will also have full control over the devices and the workspaces to which they belong.
- Users will see all of Mobile Center's shared devices (devices in Shared Assets), as well as devices assigned to the workspace in which they are working.
Tip: If you installed the connector in private mode and your device was then shared, you can re-assign the device for your own use only by disconnecting it and then plugging it back in.
The following details are displayed in the Devices page and device card:
License capacity. This the number of devices that can be accessed concurrently. For more, see License management.
- Device Host.(Top right corner) The device host type, for example, SRF for a device hosted privately by StormRunner Functional, or EMULATED for an emulated device.
- Number of devices. The number of devices that match the current filter, out of the total number of connected devices.
- Operating System and version.
- Device name. Click the name to edit it. The default is the model number of the device.
- Manufacturer and Model name.
- Workspace name. The workspace to which the device is assigned .
Connector latency. When you hover over the latency icon , Mobile Center shows the connector's latency. This is the latency between the client and the connector to which the device is connected, for example Remote view latency: 18 ms. For optimal remote screen viewer performance, select a device with good latency. The latency is considered good if it is less than 100 ms (green), mediocre if it ranges between 100 and 200 ms (yellow), poor if it ranges between 200 and 300 ms (red), and bad if it exceeds 300 ms (gray).
Note: The latency display is not supported for Internet Explorer or Edge browsers.
Reservations. The reservations for the device. For example, Available or Reserved by... Until. Click this section to view and create reservations. A triangular emblem at the bottom right of the device indicates its status:
Reserved for you Reserved and in use by you Reserved for someone else Reserved and in use by someone else
- Emulator. This indicates that the device is being connected through an emulator. You can use the Features filter to filter by physical or emulated devices.
You can also view the devices in a list. Click the List and Card view buttons in the upper right corner to toggle between the views. To see the details in List view, select a device and click More.
Note: To use iOS devices with Mobile Center you must re-sign the Agent apps with a development certificate of an Apple Developer account. For more details, see Re-sign the Agent apps.
You can find a specific device in one of the following ways:
- Search. In the right pane, click the Search button. In the text box, specify the name, device ID, model, or manufacturer of the device.
Filter. Use the left panel filter in the Devices page to limit what items are displayed, so that you can focus on the information that is important to you. Using the filter panel, you can specify your criteria in the following areas:
- OS. Operating System: Android or iOS. Use the slider to select an OS version.
- Features. Physical or Emulator device, Phone or Tablet
, SV enabled device.
- Connector. The connector whose devices you want to display.
- Workspace. Display devices assigned to a specific workspace.
Available Available devices Reserved for me Devices reserved for you, or that are currently in use by you. Reserved for others Devices that have been reserved for someone else, or are currently in use by someone else. Disconnected Devices that were once connected to Mobile Center, but are no longer connected. Disconnected devices are displayed faded.
Tip: Use the Clear link in the upper right corner of the filter panel, to remove all of your device filters.
When you hover over a specific device in Card view or select it in List view, the following options are displayed
Open device remotely. For Available or Reserved for me devices, access the device remotely. This reserves the device for 30 minutes or uses an existing reservation, allowing you to interact with the device
If the device is in the Reserved and In Use By Me state, the interaction with the device in the remote session will be limited and most options in the control panel will not be available. However, this option is useful for when you want to remotely connect to a device while an unattended test (such as an Appium test) is running. If the device is Reserved for or In use by others, or if you do not have the adequate license capacity, this button will be disabled.
When you are finished working with the device, click END SESSION in the top right-hand corner of the remote window to close the session and delete the device reservation.
For information about exploratory testing and interacting with the device, see Device control panel.
Remove device. Remove a Disconnected device. To remove a device with another status, it must first be disconnected from Mobile Center.
Unlock device. Release a device that is locked.
The top section contains general information about the device: its ID, name, network connectivity level,
This window has three tabs:
Tip: You can also access the Device Information window by clicking the lower section of a device card (for example, where it says "Available").
If you enabled SRF Device Lab integration in the Administration Settings, you will also see the StormRunner Functional connectors.
To add a new connector, click . Follow the instructions in the dialog boxes and wizards. For more details on installing connectors, see Install the connector on a Windows machine, Install the connector on a Linux machine or Install the connector on a Mac machine.
Sign and distribute iOS Agent apps
Admin users can set up Mobile Center to automatically re-sign these apps and distribute them to all connectors. When devices are connected to a connector, the re-signed apps are automatically installed on the devices.
When working with many devices and workspaces, you may need to use different signing services for your devices. For example, in certain iOS environments you can only sign up to 100 devices. For details on how to add signing services, see Multiple packaging services.
The Connectors list action buttons let you:
- Reconnect Devices, a step required after the Agent app distribution status is complete. Select multiple rows to perform this action on several connectors at once.
- Remove a connector from the list. This can only be done for a disconnected connector. The button only removes the connector from the list of connectors; it does not delete the physical connector installed on a remote machine. When a connector that has been removed is restarted, it will be displayed again in the grid.
Tip: You can select multiple connectors and apply the actions to all of the selected connectors.
To automatically sign and distribute agents:
- Set up the iOS packaging service. Make sure that you have set the properties for the packaging service and specified any additional packaging services, on the Administration settings page.
- Click DEVICE LAB > CONNECTORS. This section is only visible to admin users.
- Click START. The resigning and distribution will begin, affecting all connectors.
- When the distribution is complete, click UPDATE. In the list of connector details (shown above), you can see the latest distribution status of the re-signed Agent apps to the connector.
When the distribution status is complete, you need to reconnect the devices with the updated packager. Do one of the following:
- Select the relevant connectors in the grid, and click Reconnect devices.
- From the Lab console, restart the iOS devices associated with that connector.
- Physically disconnect and reconnect the devices.
- To view the devices associated with a specific connector, click the X Devices link in the row of the desired connector. The Devices view opens with the devices filtered for the selected connector.
Note: These capabilities are only available for Trial, Ultimate, and Enterprise licenses.
You can make a reservation for a specific device, provided that you have access to the workspace. Your administrator can set up workspaces and assign you to one or more of them.
For a new reservation, click to open the Create Reservation window. Once you reserve a device, it will be locked for you at that time.
Here are some guidelines to remember:
- You can specify an end time for your reservation, an open-ended reservation with no end time, or a reservation until the end of the test.
- By default, reservations are active for 30 minutes and extendable for 5 minute intervals. Your administrator can modify these values or edit specific reservations.
- After you reserve a device, the Reservations page indicates that you reserved it, and shows the start and end times.
A triangular emblem at the bottom right of the device indicates its status. For details, see Device display - Reservations.
Check the filter panel to see what options are selected. Mobile Center displays only the items that fit the filter conditions. To display all items, select all the filter options and clear the search field of any text that you have entered.
To see a device, you need to have access to the workspace to which the device belongs. Make sure that your administrator has allowed you access to the devices you need to test.
If a device remain locked after you ended the remote device session, click Refresh in the Devices tab.
If you use photo or video simulation after installing an app through the Control Panel's device interaction—if you click Install app again, the spinning icon will remain. Workaround: End the remote device session and reopen it.