View results offline

This section describes the Results page which displays performance measurements and results for resources that were monitored in the test run. Viewing results offline provides quick access to performance graphs without having to wait for run results to be collated and analyzed.

The only difference in viewing results offline—compared to online—is that there is no data flow or runtime view.

Note: This feature is provided as a tech preview version.

View test results

  1. Use one of the following:

    • From the Dashboard: From the Performance Center navigation toolbar, click and select Dashboard. In the Finished section of the Runs pane, select a performance test and click View Results.

      Note: Only the four most recent test runs are displayed.

    • From the Test Management or Test Runs module: From the Performance Center navigation toolbar, click and select Test Management/Test Runs (under Testing). Select a performance test in the test management tree, and click the Runs tab. Select a test run instance and click View Results.

    Note: Offline results cannot be displayed if there was an error that did not allow the test to run, or if the results no longer exist (see Size and time limits for storing offline results below).

  2. The results page provides you with the following resources:

    UI Element Description
    Dashboard

    Displays performance measurements and results for those resources that were monitored in the test run in offline graphs.

    For an explanation of the Dashboard tab, see:

    Results Displays result files for a selected test run. For details, see Download and upload result files.
    Event log Displays the event log for a selected test run. For details, see View test run event logs.
    HTML Report

    Opens an HTML version of the Analysis Summary report, which analyzes the data collected during the performance test run. The report provides general information about the performance test, lists statistics about the test run, and provides links to graphs containing test run data.

    For more details regarding the summary report, see the LoadRunner Help Center.

    NV Insights report

    Opens the NV Insights report for the selected test run. For details on how to integrate the report in your performance test, see How to Integrate NV Insights into a Performance Test. For user interface details, see NV Insights Report.

    Note: Available only if NV Insights is enabled and included in the performance test.

Back to top

Evaluate a test's status

After a test run, the test summary contains general information about what happened during the test.

The summary pane provides the following data:

UI Elements

Description

<Run State>

The current run state, and the name and ID of the test.

Duration The time that the test took to run (HH:MM:SS).
Start Time The start date and time of the test run.
End Time The end date and time of the test run.
Hits Per Second

How many hits (HTTP requests) there have been to the web server by Vusers during each second of the test run.

Throughput

The amount of throughput, in bytes, on the web server during each second of the test run.

Errors

The number of Vuser errors that occurred during the test run. If there are errors, click the number of errors link to view details in the Messages view. For details, see Performance Test Run Page - Messages View.

Transactions

Bar chart displaying the number of completed, successful and unsuccessful transactions during the test run. Click the transactions link to view details in the Transactions view. For details, see Performance Test Run Page - Transactions View.

Total Vusers

The total number of Vusers that ran in the test.

Click the drop down arrow to display a breakdown of the statuses of the Vusers in the performance test. For details, see View results offline.

Opens an area below the summary area, which displays the following:

  • Controller. The Controller that was used in the test.

  • Vusers Max. The maximum number of concurrent Vusers that ran in the test.

Search. Enables you to filter the information being displayed in each of the views by name.

Back to top

Select which graphs are displayed

  1. Open the results Dashboard, and click the Graphs tab. For details, see View test results.

  2. From the graph selection list on the right side of the pane, select which graphs to display in the graphs pane.

    UI Elements

    Description

    <Graphs tree>
    • <search>. Enables you to search the basic graphs by name.

    • Basic Graphs. Displays a list of the configured online graphs. Select a graph to display it in the Online Graphs pane.

    • Merged Graphs. Enables you to merge several graphs into one. To create a merged graph, click Add. In the graph editor, drag the graphs that you want to merge.

    • <Graph icons> Displayed to the left of the graph name:

      • Indicates the graph is currently being displayed in the Online Graphs pane.

      • Indicates an anomaly has occurred in the graph.

Back to top

View measurements and results for the test run

Open the results Dashboard, and click the Graphs tab. For details, see View test results.

The offline graphs display performance measurements for resources that were monitored in a performance test.

To adjust the time range displayed in the graph, you can drag or re-size the sliders in the timeline. Pull the sliders on both sides to focus on a particular time period. You can also move the selection (maintaining the same granularity), and select a new range.

The following table summarizes the display options.

UI Elements

Description

Global display options

Filter Measurement. Enables you to filter measurements by name for all graphs in the graphs pane.

  • Show only visible. Enables you to hide the non-visible measurements from the legend.

  • Has Anomalies. Enables you to display only those measurements that have an anomaly.

Configuration. Enables you to configure all graphs displayed in the display pane. The following options are available:

  • Time Display. The time displayed on the x-axis.

    • Relative to Load Test start. Displays the amount of time that has elapsed since the beginning of the test (in hours, minutes, and seconds).
    • Controller clock. Displays the time on the Controller clock.
  • Show Anomalies. Displays the anomalies sleeve and the plot bands for those measurements that have an anomaly.

Graph Layout. Displays graphs either side by side (up to three in a row), or stacked one on top of another.

Maximize/Minimize Graph. Enables you to maximize/minimize the graphs displayed in the graphs pane.

 Individual graph options

Enables you to filter measurements by name in the legend.

  • Show only visible. Hides the non-visible measurements from the legend.

  • Has Anomalies. Enables you to display only those measurements that have an anomaly.

Configure. Enables you to configure the selected graph. The following options are available:

  • Duplicate. Enables you to duplicate the selected graph.

  • Show Anomalies. Displays the anomalies sleeve and the plot bands for those measurements that have an anomaly.

Enables you to maximize/minimize the selected graph.

When you maximize the graph, the following information is displayed:

  • Expand Legend. Expands the area of the legend.

  • Filter Measurement. Enables you to filter measurements by name in the legend.

  • Show only visible. Enables you to hide the non-visible measurements from the legend.

  • Has Anomalies. Enables you to display only those measurements that have an anomaly.

  • Legend Options. (Displayed on left-hand side of the Name column.) The following options are available:

    • Show Favorites. Displays the measurements set as favorite.
    • Hide Visible. Hides the visible measurements on the graph.
    • Select Visible as Favorites. Saves the currently displayed measurements as favorites.
  • Name. The measurement name.

    A warning icon appears next to the name of each measurement that contains an anomaly.

  • Scale. The graph scale.

  • Max. The measurement's maximum value.

  • Min. The measurement's minimum value.

  • Avg. The measurement's average value.

  • Std. The measurement's standard deviation.

  • Last. The measurement's last value.

  • Measurement Options. (Displayed on left-hand side of the Set as Favorite icon.) The following options are available:

    • Show. Displays the measurement on the graph.

    • Hide. Hides the measurement from the graph.

    • Bold. Displays the measurement in bold.

    • Show/Hide Anomaly Sleeve. Shows or hides a sleeve (band) that indicates the expected behavior for the measurement. A plot band indicate deviations which are considered to be anomalies.

      Note: This option is not available when the Show Anomalies option is cleared in the  Graph Options menu.

    • Show only me. Displays the selected measurement and hides the others from the graph.

  • Set as Favorite. Sets the measurement as favorite.

  • <color>. Enables you to select in which color the measurement appears in the graph.

  • <page list>. Displayed only for graphs that have at least 20 measurements. Enables you to move to the first, last, or a specific graph measurements page.

Enables you to hide the selected graph.
Indicates an anomaly has occurred in the graph (displayed to the right of the graph name).
<zoom a graph line>In the graph, select a graph line and drag it up or down to zoom in. To reset, click Reset Zfoom.

Back to top

View transaction status

The transactions view provided details of transactions performed during the test run.

  1. Open the results Dashboard. For details, see View test results.

  2. Click the Transactions tab to see details of the completed, successful, and unsuccessful transactions performed during the test run.

For user interface details ,see Performance Test Run Page - Transactions View.

Back to top

Find out if anything went wrong with your test

The Messages view alerts you to the problems that were found during the test run in the following categories: error, warning, notification, and debug.

  1. Open the results Dashboard. For details, see View test results.

  2. Click the Messages tab to display messages that were sent to the Controller by the Vusers and load generators during a test run.

  3. If there are errors, click the Errors link in the summary to open the output window which displays all the errors.

For user interface details, see Performance Test Run Page - Messages View.

Back to top

Size and time limits for storing offline results

The system administrator sets a size and time limit after which offline result files are deleted. By default, result files are deleted if they have not been opened for 30 days, or when the results folder exceeds 10 GB (the least used files are deleted first).

For details on configuring offline result settings, see Define general host settings.

Back to top

See also: