Configuring PPM for Integration with Service Manager

To configure PPM for integration with Service Manager, do the following:

Install and configure ALM module.

(Recommended but not required) Set your PPM Server to Restricted mode.
1. Stop your PPM server.
2. Run the following command:
```
cd c:\ppm\bin
sh ./setSErverMode.sh RESTRICTED  
```
3. Restart your PPM server.
  
  In cluster environment, make sure there is only one administrator performing the configuration tasks.
(Optional) Deploy the ALM bundle by running the following command:
```
cd c:\ppm\bin
sh ./kDeploy.sh -i ALM
```
The "Deployment ALM has been successfully installed." message displays.

Note: You can use the old version of ALM bundle even if PPM is upgraded to a newer version.
Modify the Contact User Data user data.
1. From the menu bar, select Open > Administration > Open Workbench.
  
  The PPM Workbench opens.
2. From the shortcut bar, select Configuration > User Data.
  
  The User Data Workbench opens.
3. Click List, locate Contact User Data in the Results tab, and click Open.
4. On the Fields tab, click New.
  
  The Field: New dialog pops up.
5. Provide values for the new field as follows:
  
  Field Prompt:LocationToken:LOCATION
  Description:Added for ALM integration
  Validation:Text Field - 40
  User Data Col:USER_DATA1
  Display:Yes
6. Click OK.
7. Click Save.

Modify the CRT - Priority - Enabled validation.

From the PPM Workbench shortcut bar, select Configuration > Validations.

The Validation Workbench opens.
Click List, locate CRT - Priority - Enabled in the Results tab, and click Open.

The Validation : CRT - Priority - Enabled dialog pops up.
Click New.

The Add Validation Value dialog pops up.

Add new validation values as follows:

New Code	New Meaning
MEDIUM	Medium
IMMEDIATE	Immediate
PLANNING	Planning

Click OK.
Click Save.

Create ALM related security groups.
1. From the PPM Workbench shortcut bar, select Sys Admin > Security Groups.
  
  The Security Group Workbench opens.
2. Click New Security Group.
3. Type ALM - Application Developer in the Name field and provide other values as necessary.
4. Click OK.
5. Repeat step iii and step iv to create the following security groups:
  
  ALM - Applications Development Manager
  ALM - CAB group (Change Advisory Board)
  ALM - Change Builder
  ALM - Change Manager
  ALM - Customer
  ALM - IT Executive Board
  ALM - Independent Tester
  ALM - Operations Manager
  ALM - QA Manager
  ALM - Release Manager
  ALM - SOX - System Owner
Remove unnecessary Request Header Type Field Groups.
1. From the PPM Workbench shortcut bar, select Demand Mgmt > Request Header Type.
  
  The Request Header Type Workbench opens.
2. Click List, locate ALM - Request for Change (RFC) in the Results tab, and click Open.
3. Click Field Groups.
4. Uncheck the following field groups:
  
  CMDB Application
  MAM Impact Analysis
  QC/ALM Info
5. Click OK.
6. Click Save.
7. Click OK.
Create a PPM integration user account.
1. From the PPM Workbench shortcut bar, select Sys Admin > Users.
  
  The Users Workbench opens.
2. Click New User and provide values for the new user as follows:
  
  Username: SM_PPM_INTFirst Name:SM_PPM
  Last Name:Interface
  Password: <Your_Password>
  New password on login:No
  Application Licenses:Demand Management
3. Click Save.
4. Go to the Security Groups tab, click New and add the following security groups:
  
  PPM User
  PPM Demand Manager
5. Click Save.
6. Click OK twice.
Set your PPM server back to Normal mode.
1. Stop your PPM Server.
2. Run the following command:
```
cd c:\ppm\bin
sh ./setServerMode.sh NORMAL
```
Modify the server.conf file.
1. Open the server.conf file in Notepad.
2. Append the following directives and save the file:
```
com.kintana.core.server.MAC_LOG_SEVERITY=0
```
3. Run the following command:
```
cd bin
sh ./kUpdateHtml.sh 
```

Encrypt the SM_PPM_INT user's password.
1. Run the following command:
```
cd c:\ppm\bin
sh ./kEncrypt.sh <PPM_User_Password> 
```
2. Save the resulting encrypted string.
  
  You would need to specify the PPM Integration user password (enclosed with the #!# character delimiters) in the "*.settings" files later.
Setup configuration files for Service Manager=>PPM direction.
1. Run the following command:
```
cd c:\ppm\conf\sdi 
cp serviceManger-adapter.settings1 serviceManager-adapter.settings 
```
2. Edit the serviceManager-adapter.settings file.
  1. In the <connector> section, set the following:
    
    timeZone=<Same_As_PPM_SM_TIME_Zone_settings>
    
    For example, timeZone=US/Pacific; preferred GMT-08:00 format.
    
    userName=<SM_USER_ID>
    
    For example, userName=SM_PPM_INT
    
    Make sure this account exists on Service Manager application.
    
    password=<CLEAR_TEXT_SM_USER_ID_PASSWORD>
    
    For example, password=<plain SM password, or encrypted SM password>
    
    We recommend that you use encrypted SM password.
    
    serviceUrl=http://<SMC_WEB_SERVICES_URL>:<PORT>/sc62server/PWS/
  2. In the <convertor> section, change scripts=convertSMToPPM.js.sample to scripts=convertSMToPPM.js.
  3. In the <sender> section, set the following:
    
    userName=<SMC_USER_ID>
    
    For example, userName=SM_PPM_INT
    
    Make sure this account exists on PPM application.
    
    password=<![CDATA[insert encrypted password string]]>
    
    For example, password=<![CDATA[<encrypted password
    
    Note: Do not enclose the password with #!#.
    
    requestType=ALM - Request For Change (RFC)
    
    Note: If you changed the request type for this integration, make sure to change the request type name here accordingly.
Setup configuration files for PPM=>Service Manager direction.
1. Run the following command:
```
cd c:\ppm\conf\sdi 
cp ppm-sm-adapter.settings1 ppm-sm-adapter.settings 
```
2. Edit the ppm-sm-adapter.settings file.
  1. In the <connector> section, set the following:
    
    requestType=ALM - Request For Change (RFC)
    
    Note: If you changed the request type for this integration, make sure to change the request type name here accordingly.
    
    userName=<SMC_USER_ID>
    
    For example, userName=SM_PPM_INT
    
    Make sure this account exists on PPM application.
    
    password=<![CDATA[insert encrypted password string]]>
    
    For example, password=<![CDATA[<>encrypted password string>]>
    
    Note: Do not enclose the password with "#!#".
    
    requestStatusNames=<List_of_comma-separated_PPM_Request_statuses>
    
    The value is the statuses of requests to be synchronized to SM. The statuses are separated by commas.
    
    For example, requestStatusNames=new, in progress, on hold, complete
  2. In the <convertor> section, change scripts=convertPPMtoSM.js.sample to scripts=convertPPMtoSM.js.
  3. In the <sender> section, set the following:
    
    userName=<SMC_USER_ID>
    
    For example, userName=SM_PPM_INT
    
    Make sure this account exists on PPM application.
    
    password=<CLEAR_TEXT_SM_USER_ID_PASSWORD>
    
    For example, password=<plain SM password>
    
    timzeZone=<Same_As_PPM_SM_TIME_Zone_settings>
    
    For example, timeZone=US/Pacific; preferred GMT-08:00 format.
    
    serviceUrl=http://<SMC_WEB_SERVICES_URL>:<PORT>/sc62server/PWS/
3. Edit the js files in the c:\ppm\sdi\ppm-sm-adapter.ext directory: convertPPMToSM.js and convertSMToPPM.js.
  
  Add the following value:
  1. Find the following line:
    serviceManagerRFC.setField(PPMURL,"http://localhost:<PPM_PORT>/itg/web/knta/crt/RequestDetail.jsp?REQUEST_ID=" + ppmRFC.get("REQ-REQUEST_ID"));
  2. Replace <PPM_PORT> with your port number.
  3. Save the modified file.
4. Compile the Web Services stub.
  
  Caution: You must recompile the Web Services stub if you modified the *.settings, convertRequest.js file, or tailored Service Manager web services schema.
  1. Open a Command Prompt window by typing cmd in the Start > Run dialog and click Open.
  2. Run the following command:
    cd c:/ppm/bin/sdi
  3. Run the following command:
    kGenerateServiceCenterStub.bat http://<SMC_WEB_SERVICES_URL>:<PORT>/sc62server/PWS/ChangeManagement?wsdl <KINTANA_SERVER_NAME>
    
    For example,
    
    kGenerateServiceCenterStub.bat http://sm28p-01.infra.mms:13087/sc62server/PWS/ChangeManagement.wsdl app
    
    The following message displays after the stub is generated:
    Stub generated successfully
(Optional) For cluster setup, do the following:
1. Compress the entire c:\PPM folder into a zip file and copy it onto other members the first time.
2. For subsequent changes, copy the following folders to all cluster members at the same directory location:
  - c:\ppm\sdi-persistency folder
  - c:\ppm\conf\sdi directory
3. If there are subsequent changes, do not forget to regenerate the Web service stubs on all cluster members.
  
  For more information about generating Web service stubs, see Generate web service stubs .
Restart your PPM Servers.
Validate the following:
1. The PPM ALM Startup Service is running.
  1. In PPM Center, from the menu bar, select Open > Administration > Schedule Services.
  2. The Schedule Services page opens.
  3. Check that the ALM Startup service is running.
2. Check the c:\ppm\sdi-persistency folder.
  1. You should see .ser, .properties, .log, .data files related to serviceManager-adapter.
  2. You should see .ser, .properties, .log, .data, files related to ppm-sm-adapter.
  3. If files are missing, the possible error is with the ".settings" file.
  4. Date for these files should be recent.
  Tip: This folder is generated automatically by the system after the configuration completes. It stores the real configuration files and JS files to be called by the system later. If you modified any configuration file or JS file in the <PPM_Home>/conf/ folder after this sdi-persistency folder is created, for the changes you made to take effect, make sure you delete the sdi-persistency folder before restarting your PPM Servers.

Configuring PPM for Integration with Service Manager

Send Help Center Feedback