Endpoints

This topic describes how to designate endpoints.

In this topic:

Endpoints overview

The default TCP/IP port (endpoint) is 49201, but you can specify a different port for a server configuration. If you have more than one server configurations running on the same computer, each server configuration must use a unique endpoint. For example, if Server Configuration 1 uses the endpoint 49201, Server Configuration 2 must use a different endpoint. If you attempt to run server configurations that have the same endpoint and computer name at the same time, only the first server configuration you select will start successfully. The remaining server configurations will appear to start, but in fact are ignored by the StarTeam server.

Back to top

Designate endpoints

You can specify a different port for a server configuration. This operation can be performed only on running server configurations. The changes take effect once you restart the server configuration.

To specify a different port for a server configuration:

1. Open the Server Administration tool and select the server configuration.
   

   Note: If you are using the client, you will be able to administer remote servers only.

2. Click Tools > Administration > Configure Server.
   The Configure Server page opens.
3. Select the Protocol tab.
4. Type a port number in the TCP/IP (Sockets) field to activate a different port.

   The range for port numbers is 1023 through 65535.

5. Optionally, click Default if you wish to return to the default endpoint setting (49201).
6. Click OK.
7. Restart the server configuration for this setting to take effect.
   

Back to top