When installing a Hummingbird HostExplorer terminal emulator or patches, make sure that UFT is closed.
|No terminal emulator installed||
An error message is displayed if the Terminal Emulator Add-in is installed and loaded, but you don't actually have a terminal emulator installed locally.
You can do one of the following:
You may experience unexpected behavior from UFT after you install an EXTRA! emulator.
This happens because the EXTRA! installation may have copied and registered an outdated version of the atl.dll file on your computer.
Workaround: Locate the atl.dll in your system folder (WINNT\system32). Its version should be 3.0 or higher. Register it with the regsvr32 utility.
|Multiple open emulator sessions||
If you have more than one terminal emulator session open, UFT does not recognize either session.
While recording or running your test or business component, ensure that only one terminal emulator session is connected at a time.
|Disconnect session steps||
If your test or business component contains steps that disconnect the current emulator session during the run session, followed immediately by a TeScreen.Sync command, the test or business component run might stop responding or take a long time to respond.
Workaround: Remove the Sync command from the test or business component, or replace it with a Wait statement. For more details, see the Utility Objects section of the UFT Object Model Reference for GUI Testing.
|Busy emulator sessions||
Inserting a checkpoint, creating a new test or business component, or opening an existing test or business component when the emulator session is busy may cause unexpected problems.
Workaround: Check the connection status of your emulator on the status line of the emulator screen before performing any of these operations.
|Disconnecting from a Host On-Demand session while recording||
Unexpected behavior may occur after disconnecting from a Host On-Demand session while recording.
Workaround: Stop recording before disconnecting from the session. Then, manually add a step that disconnects from the session.
|Closed emulator session while recording||
You may experience unexpected behavior if the terminal emulator is closed while UFT is recording.
Emulators with limited / no HLLAPI support
When working with an emulator that does not support HLLAPI, or with an emulator that has been configured as supporting text-only HLLAPI operations, do not change the size of the terminal emulator window after configuring the emulator settings.
|Micro Focus Web-To-Host Java Client||
To enable support for a Micro Focus Web-To-Host Java Client session that is configured to open in a separate window, specify the title of your session window.
Use the Tools > Options > GUI Testing tab > Terminal Emulator > Adjust Configuration > Object identification settings > Identify emulator window based on title bar prefix option.
You may need to clear this value when switching to another configuration.
|Micro Focus RUMBA Web-to-Host||
When using the Terminal Emulator Configuration Wizard to configure the screen sizes of Micro Focus RUMBA Web-to-Host, you cannot use the Mark Text Area option to draw on top of the emulator window.
Workaround: Configure the text area position of the screen manually.
The UFT Terminal Emulator Add-in can identify emulator window objects only when the emulator is connected. For example, you cannot use the following statement to connect to an emulator session:
Workaround: You can record any steps that need to be performed prior to connection with the emulator. These steps are recorded as if the Terminal Emulator Add-in is not loaded. After the emulator is connected, stop the recording session and begin a new recording session to record terminal emulator objects.
When using an emulator that supports HLLAPI, if your emulator session disconnects from the host while recording, UFT no longer recognizes the emulator, even after reconnecting.
Workaround: Stop recording, reconnect the session, and continue recording.
|Micro Focus Terminal Viewer 3.1 5250||
When working with Micro Focus Terminal Viewer 3.1 5250 session, all of the fields that appear on the screen before the first unprotected field are recognized as a single field.
|Micro Focus RUMBA||
UFT may not recognize a TeField object in a Micro Focus RUMBA session immediately after installing the emulator.
Workaround: Restart your computer after installing RUMBA, even if the installation does not request a restart.
Recording and learning objects
If you record a test or business component using one terminal emulator, it may not run correctly on another terminal emulator. For example, tests recorded on RUMBA may not run on IBM PCOMM.
Clicking, typing, or moving objects in the terminal emulator window while UFT is running a test or business component may cause unexpected results.
Workaround: Wait until the end of the test or business component, or pause the test or business component execution before using the emulator.
|Hummingbird 9.0 5250||
To record and run tests or business components on Hummingbird 9.0 5250 sessions, you need to install a patch for Hummingbird.
Workaround: Contact Hummingbird customer support to get the patch that fixes the problem with HLLAPI where all 5250 fields appear protected.
|Reflection HLL API||You might encounter unexpected results when you run the Reflection HLL API in multiple threads mode.|
Test Objects and test object methods
When using the SendKey method to unlock a terminal emulator, for example, TeWindow("TeWindow").TeScreen("screen5296"). SendKey TE_RESET, some emulators (such as Host On-Demand) may not be unlocked.
Workaround: Specify the keyboard event to send for the RESET command.
Use the Tools > Options > GUI Testing tab > Terminal Emulator pane > Adjust Configuration > Run Settings > Run steps containing special emulator keys using keyboard events > Keys for RESET function option.
By default, UFT uses the attached text and protected properties in TeField test object descriptions.
If the attached text for a field changes from session to session, UFT cannot find the field during the run session.
You can also create a smart identification definition for TeField objects.
This enables your recorded test or business component to run successfully even if the attached text property value for a particular TeField object changes.
(Select Tools > Object Identification > Enable Smart Identification and click Configure.)
For details, see Smart identification.
|label TeScreen property||
You cannot use the label property in a programmatic description of the TeScreen object.
Workaround: Since only one screen can exist in the given TeWindow at any one time, you can use TeScreen("MicClass:=TeScreen").
|current column / current row TeTextScreen properties||
The TeTextScreen properties current column and current row are available only for emulators that support HLLAPI.
|locaton TeField property||
The location property is not recorded for TeField objects.
Workaround: Use the index property instead.
|Bitmap checkpoints on TeScreens||
In some cases, a bitmap checkpoint on a TeScreen may fail because the cursor shows in the expected bitmap, and not in the actual bitmap (or the other way around).
Workaround: Set the emulator cursor to a slow blink rate, or not to blink at all. This enhances the probability that the cursor is not captured in the bitmap.
When working with the IBM PCOMM emulator, UFT may ignore special European language characters while recording or running a test or business component.
Workaround: Set the code page for your IBM PCOMM emulator in UFT.
Use the Tools > Options > GUI Testing tab > Terminal Emulator > Adjust Configuration > Emulator settings > Code page number (IBM PCOMM only) option.
Try setting the Code page number (IBM PCOMM only) option to 1252.