Install the connector on a Windows machine

The Device Connector is a standalone component for connecting devices to UFT Mobile. You can install the connector as a standalone component on a Windows machine, and configure it to connect to the UFT Mobile server. Devices connected to distributed connector machines become part of the UFT Mobile device lab.

For details on how to see all your connectors, see View and manage connectors.

Before you start

The standalone connector for UFT Mobile can be installed as a full installation, or as an upgrade to an existing installation of the connector for UFT Mobile 3.0 or later.

Before installing or updating the connector, check that your machine complies with the recommended system requirements and that your devices are supported. For details, see system requirements and Connect devices to UFT Mobile.

For new installation only:

  1. The server should be accessible to the connector. Navigate to: http/s://<UFT Mobile server IP address>:<server port> and check that you can access UFT Mobile.
  2. Make sure that a UFT Mobile server is not already installed on the machine.

Back to top

Install the connector

Before installing the connector, make sure your machine meets the connector requirements.

To install the connector:

  1. Obtain an access key for the connector.

    • Admin user: select the Access Keys tab. Click Generate New and provide a name, type (Connector), expiration date, description (optional). Then, click Generate.
    • Non-admin user: request one from your admin. Select Contact Your Admin from the Help menu (upper right).
  2. Download the connector from UFT Mobile on ADM Marketplace.

    • For admins, Select Download Connector in the CONNECTORS page. Download the appropriate connector from UFT Mobile on ADM Marketplace.
    • For a non-admin user, select Download Connector from the Help menu in the upper right corner of the UFT Mobile console.
  3. Extract the contents of the connector installation file to a folder on your computer. Locate the .exe file.

  4. Double-click on the .exe file to open the Installation wizard. Read the contents and click Next.

  5. Fill in the information or answer the questions in each of the Installation wizard pages following these guidelines:


    Enter your credentials. For UFT Mobile, enter the access key provided by your admin.

    UFTM SaaS: The SSL Enabled option should be selected.

    If connecting over a proxy, select Server address in the proxy section, and specify the server, port, and credentials if required.
    Connector configuration
    Provide a meaningful name for the connector, as this will allow you to effectively filter devices based on connector names. Enter the Connector's IP address (if the IP is static) or FQDN, or accept the defaults.

For details on how to change the configuration after the installation, see Modify a connector.

Caution: To ensure integrity and confidentiality of the information stored with UFT Mobile, we strongly recommend that you incorporate filesystem monitoring on the installation and temporary folders.

Back to top

Prepare devices

Set up your Windows machine to detect the devices you want to connect to UFT Mobile by performing the following steps:

iOS devices

  1. Make sure you have iTunes installed on your computer. For details, see

    Note: For iOS 15 and later, iTunes 12.11 and later is required.

  2. If you haven't already done so, follow the steps for setting up iOS devices.

Android devices

  1. Download the USB driver for your devices. See the Android developers documentation for a list of links to Original Equipment Manufacturers (OEM) USB Drivers. Alternatively, search the Web for a USB driver for Windows, for your device.

    For Google Nexus devices, download the Google USB driver.

  2. Extract the contents of the downloaded driver's archive file.
  3. Connect the device(s) to your machine and install the driver per Windows version as described on the Install OEM USB Drivers page.

    Note: When you connect the device through a USB port, a security message may ask you to allow USB debugging or trust the connected computer. Accept the warning.

  4. If you haven't already done so, follow the steps for the initial configuration of Android devices.

Back to top

Connect devices and verify the connection

  1. Connect your devices to your computer via USB cable. Accept all notification, trust, or location pop-ups that may be displayed when you connect a device.
  2. When the connector is running, the following items are automatically installed on the devices plugged into the connector machine:
    • Remote viewer services
    • The Agent application

      Wait until the Agent is running before interacting with the device. If the Agent crashes, try to unplug the device and then plug it in again. For additional troubleshooting information, see Troubleshoot the Windows connector.

      Tip: If you unplug a device, wait 5 seconds before reconnecting it to allow the system to stabilize.

  1. If the Agent app does not start up after you connect the devices, check if the devices are recognized:

Additional considerations for iOS devices

Back to top

Start, stop, and restart the connector

When the installation is complete, the setup program prompts you to start the connector service.

If you chose not to start the connector service after installing it, you can perform a manual Start, Stop, and Restart from the Services console, or directly from the machine's Start menu:

  • Start > UFT Mobile Connector > Start UFT Mobile service
  • Start > UFT Mobile Connector > Stop UFT Mobile service
  • Start > UFT Mobile Connector > Restart UFT Mobile service

Back to top

Modify a connector

If you need to modify your connector details, for example to switch between an on-premises UFT Mobile server or the UFT Mobile hosted device lab, or to change the server or connector port, you can modify them using the Modify configuration tool.

To access the tool, select Start > UFT Mobile Connector > Modify configuration. The configuration wizard opens.

When running, the wizard stops the Connector service. The wizard's final page prompts you to start the service again.

When working with servers that use SSL, and you change the server details, you do not need to reinstall the connector. Use the modify configuration tool to update the connector details. Testing tool users will also need to reconfigure their SSL access to UFT Mobile. For details, see Working with SSL and certificates.

Note: The Modify configuration utility is not supported for connectors using a CA certificate, connecting to a UFT Mobile server with SSL. If you want to modify the connection to the server after importing the CA certificate to the connector, remove the existing connector and then reinstall it.

Back to top

Enable localization

To display system apps (apps that are used to run the device itself) in a supported language other than English, after installing the connector, navigate to <path to your Windows connector folder>\conf\ and uncomment the following line in the file:

Back to top

Troubleshoot the Windows connector

This section provides some tips and guidelines for getting your connector to work.

Back to top

Uninstall a connector

You can uninstall the connector in one of the following ways:

  • Double click the shortcut on the desktop and select Uninstall UFT Mobile Server.
  • Alternatively, uninstall from the Apps page in Settings, or from the Programs and Features control panel.

If certain applications were open during the uninstall process, some old connector files will remain. This may affect a future installation. It is therefore recommended that you check that all connector files were removed. Otherwise, remove all files and folders manually, located by default at C:\Program Files\UFT Mobile Connector\connector.

Back to top

See also: