Create and Verify the Connection Between Controller and Agent Machines
This task describes how to set up your system to monitor the servers over a firewall.
Configure the Controller for Running Over a Firewall
To run or monitor Vusers over a firewall, you need to create a unique connection between the Controller and the agent machines. Agent machines include load generator machines that will be running over a firewall and all Monitor-Over-Firewall machines.
This connection is made through the MI Listener, which serves as a router between the Controller and the LoadRunner agent. To establish this connection, you configure the Controller machine to define the agent machine as a load generator.
To configure the Controller for running Vusers or monitoring over the firewall:
- Define the load generator settings in the Load Generators dialog box. For the server name, be sure to use the same Local Machine Key setting as in the Agent Configuration.
- Define the settings in the MI Listener Configuration Dialog Box, using the same MI Listener name as in the Agent Configuration.
Note: You cannot change the temporary folder on the host running or monitoring Vusers over the firewall.
Enable and Confirm your Connection
After you have configured the LoadRunner Agent, the MI Listener and the Controller, select the load generator in the Load Generators dialog box and click Connect.
A green or red light next to the LoadRunner agent in the system tray indicates a successful or unsuccessful connection respectively.