Set Up Your LoadRunner System Over Firewalls
The MI Listener and Monitor over Firewall setup files are provided in the LoadRunner installation package's /Additional Components folder.
Setting up your system to work with firewalls involves the following stages of configuration:
Install the Over-Firewall Components.
To enable over firewall communication, ensure that you have installed the following LoadRunner components:
MI Listener. Serves as a router between the Controller and the LoadRunner agent. You install the MI Listener component on a dedicated machine.
Monitor Over Firewall component. Used to monitor the servers that are located over a firewall. You install the Monitors over Firewall component on a dedicated machine.
Note: You can also use the Controller machine as the MI Listener without the need for a separate installation. When acting as the MI Listener, the Controller machine cannot have Vusers running on it. In this case, the Controller must be a pure Controller and not a Controller + Load Generator.
Perform the Initial Configuration of the Over-Firewall system.
Configure the LoadRunner Agent
Configure the LoadRunner agent on the monitor-over-firewall machine as well as on each load generator machine that will be running over the firewall, to communicate with the MI Listener
Connect the Controller to the Load Generator and MI Listener machines.
Configure the Controller to recognize the Load Generator and MI Listener machines and then verify the connection between the machines.
Define What to Monitor on Your Servers.
Choose the server measurements that you want your Monitor Over Firewall machine to monitor.
After installing and configuring all the necessary components, check that you are able to establish a connection between the LoadRunner agent, MI Listener, and the Controller machine. If you have difficulties, see Troubleshooting and Limitations for Firewalls.
- Secure communication over Firewalls