Allows the Vuser to perform verification checks during replay by executing the verification functions web_find or web_image_check. This option only applies to statements recorded in HTML-based mode. Vusers running with verification checks use more memory than Vusers who do not perform checks.

Default value: Disabled

Hits per Second

Pages per Second

Response Bytes per Second

Instructs a Vuser to collect data for Web Performance graphs.

Select the types of graph data for the Vuser to collect to view the (Throughput) graphs during test execution using the online monitors and after test execution using the Analysis. You view the Component Breakdown graph after test execution using the Analysis.

Note: If you do not use the Web performance graphs, disable these options to conserve memory.

Instructs VuGen to use the WinInet replay engine instead of the standard Sockets replay.

VuGen has two HTTP replay engines: Sockets-based (default) or WinInet based.

The WinInet is the engine used by Internet Explorer and it supports all of the features incorporated into the IE browser. The limitations of the WinInet replay engine are that it is not scalable and does not support Linux. In addition, when working with threads, the WinInet engine does not accurately emulate the modem speed and number of connections.

VuGen's proprietary sockets-based replay is a lighter engine that is scalable for load testing. It is also accurate when working with threads. The limitation of the sockets-based engine is that it does not support SOCKS proxy. If you are recording in that type of environment, use the WinInet replay engine.

Supported protocols: Mobile Application - HTTP/HTML, Oracle - Web, Web - HTTP/HTML, SAP - Web, Siebel - Web

Default value: disabled (socket-based replay engine).

Creates unique transaction names for automatic transactions by adding file name and line number to the transaction name.

Returns warnings for actions that fail during test replay when the actions are performed on non-critical resources, thereby enabling the test to replay successfully.

For details on how a resource is classified as critical or non-critical, see Define non-critical resources.

If you want the failure of non-critical resources to be errors and thereby fail your test, you can disable this option. This option is enabled by default.

You can set a content type to be critical by adding it to the list of Non-Resources. For more information, see Non-Resources dialog box.

Specifies which version HTTP to use: version 1.0 or 1.1. This information is included in the HTTP request header whenever a Vuser sends a request to a web server.

HTTP 1.1 supports the following features:

• Persistent Connections—see "Keep-Alive HTTP connections" below.

• HTML compression—see Accept Server-Side Compression below.

• Virtual Hosting—multiple domain names sharing the same IP address.

Keep-alive is a term used for an HTTP extension that allows persistent or continuous connections. These long-lived HTTP sessions allow multiple requests to be sent over the same TCP connection. This improves the performance of the web server and clients.

The keep-alive option works only with web servers that support keep-alive connections. This setting specifies that all Vusers that run the Vuser script have keep-alive HTTP connections enabled.

Default value: Enabled

Provides a comma-separated list of accepted languages. For example, en-us or fr. For more details, see Page request header language.

Issues a warning instead of an error upon failing to download resources due to an HTTP error.

The time, in seconds, that a Vuser waits for the connection of a specific HTTP request within a step before aborting. Timeouts provide an opportunity for the server to stabilize and respond to the user.

Maximum value: 32000 seconds

The time, in seconds, that a Vuser waits to receive the response of a specific HTTP request within a step before aborting. Timeouts provide an opportunity for the server to stabilize and respond to the user.

Maximum value: 32000 seconds

A time limit within which some activity must be performed on an HTTP connection. If this timeout is reached, the connections is closed during replay.

Sends request data to the server with the zlib compression library headers. By default, requests sent to the server include the zlib headers. This option lets you emulate non-browser applications that do not include zlib headers in their requests.

Default value: Enabled

Indicate to the server that the replay can accept compressed data. The available options are:

• None (no compression)
• gzip (accept gzip compression)
• deflate (accept deflate compression)
• br (accept Brotli compression)
• gzip, deflate, br (accept gzip, deflate, and Brotli compression)

Default value: gzip, deflate, br

Note:

• By accepting compressed data, you may significantly increase the CPU consumption.

• To manually add compression, enter the following function at the beginning of the script:

  web_add_auto_header("Accept-Encoding", "gzip");

• To verify that the server sent compressed data, search for the string Content -Encoding: gzip in the section of the server's responses of the replay log. The log also shows the data size before and after decompression.

Delete cache entries that have not been referenced within the specified number of iterations. Set to zero (0) to never delete cache entries.

Create snapshots during replay.

Note: Disabling replay snapshots improves the replay speed. However, snapshot-dependent features such as DFE and correlations, will not be able to use data captured during the replay. This may cause unstable behavior.

Instructs the Vuser to save a host's IP addresses to a cache after resolving its value from the Domain Name Server. This saves time in subsequent calls to the same server. In situations where the IP address changes, as with certain load balancing techniques, be sure to disable this option to prevent Vuser from using the value in the cache.

Default value: Enabled

Converts received HTML pages and submitted data from and to UTF-8. You enable UTF-8 support in the recording options. For more information, see Recording options.

Default value: No

The character set to use to convert received HTMLs and submitted data from/to the set charset.

This option is ignored if you enabled the previous option, \'Convert to/from UTF-8\'.

Issues a warning instead of an error when a timeout occurs due to a resource that did not load within the timeout interval. For non-resources, VuGen issues an error.

Default value: Disabled

When expecting HTML, parse the response only when it is the specified content-type: HTML, text\html, TEXT any text, or ANY, any content-type. Note that text/xml is not parsed as HTML.

Default value: TEXT

The time that the Vuser waits before aborting a step in the script. This option can be used to emulate a user behavior of not waiting for more than x seconds for a page.

Maximum value: 32000 seconds

The timeout settings are primarily for advanced users who have determined that acceptable timeout values should be different for their environment. The default settings should be sufficient in most cases. If the server does not respond in a reasonable amount of time, check for other connection-related issues, rather than setting a very long timeout which could cause the scripts to wait unnecessarily.

Sets the maximum size of the buffer used to receive the HTTP response.

If the size of the data is larger than the specified size, the server sends the data in chunks, increasing the overhead of the system.

When running multiple Vusers from Controller, every Vuser uses its own network buffer.

This setting is primarily for advanced users who have determined that the network buffer size may affect their script's performance.

The default is 12K bytes.

The maximum size is 0x7FFF FFFF.

Limit the number of content-check failures that are issued as errors, where a failure is indicated by the appearance of a string (Fail=Found). This applies to match criteria using a left and right boundary. All subsequent matches are listed as informational messages.

Default value: 10 matches

The maximum number of allowed redirections.

Default value: 10

The maximum number of times that a META refresh can be performed per page.

Default value: 2

Store the values in the ContentCheck XML file in UTF-8.

Default value: Disabled

The time to wait (in milliseconds) between testing the condition that yields false and the next retry.

Default value: 1000

Automatically adds think time to the Vuser script for emulating a user entering authentication information (username and password). This think time is included in the transaction time.

Default value: 0

Use full NTLM 2 handshake security instead of the more basic NTLM 2 session security response.

Default value: No

Use the Microsoft Security API for NTLM authentication instead of the indigenous one.

Default value: No

Enable Kerberos-based authentication. When the server proposes authentication schemes, use Negotiate in preference to other schemes.

Default value: No

Do not reuse credentials obtained in previous iterations. Enabling this setting increases the load on the KDC (Key Distribution Server). To lower the load on the server, set this option to Yes in order to reuse the credentials obtained in previous iterations.

This option is only relevant when Kerberos authentication is used.

Default value: No

Use the canonical name instead of the original hostname retrieved from the URL, to generate SPN (Service Principal Name).

Default value: Yes

Append the port number to the SPN, if the specified port is a non-standard one (neither 80 nor 443).

Default value: No

Enables Vusers to retrieve private keys from the nCipher HSM (Hardware Security Module). This option loads and initializes the CHIL engine necessary to retrieve these keys.

Default value: Yes

• Yes. Escape only binary zeros when printing request/response headers/body and/or JavaScript source.
• No. Escape any unprintable/control characters.

Only visible for Vuser Scripts generated in the C language.The memory size in kilobytes, to allocate for the JavaScript engine runtime. One runtime engine is created for all Vusers in a process.

Default: 51200 KB

Only visible for Vuser Scripts generated in the C language.The memory size in kilobytes, to allocate for each Vuser thread in the JavaScript engine.

Default: 32 KB