Registers the given callback to be run in the initialize phase of the test. The initializes are run in the same order as they are registered by calls to load.initialize().The callback may return a promise that is used to determine if the callback has succeeded or failed.

Example:

load.initialize(async function (){
//This code will run during Vuser initialization
});

Registers the given callback as a named initialize of the script with the given name. The initializes are run in the same order as they are registered by calls to load.initialize() or as defined in the run logic. The callback may return a promise that is used to determine if the callback has succeeded or failed.

load.initialize("myFirstInitialize", async function (){
   //This code will run during Vuser initialization 
});
load.initialize("mySecondInitialize", async function (){
   //This code will run during Vuser initialization 
});

Registers the given callback to be run in the finalize phase of the test. The finalizes are run in the same order as they are registered by calls to load.finalize() or as defined in the run logic.The callback may return a promise that is used to determine if the callback has succeeded or failed.

Example:

load.finalize(async function (){
//This code will run during Vuser finalization
});

Registers the given callback as a named finalize of the script with the given name. The finalizes are run in the same order as they are registered by calls to load.finalize() or as defined in the run logic. The callback may return a promise that is used to determine if the callback has succeeded or failed.

load.finalize("myFirstFinalize", async function(){
   //This code will run during Vuser finalization 
});
load.finalize("mySecondFinalize", async function(){
   //This code will run during Vuser finalization 
});

Registers the given callback to be run in the action phase of the test. The actions are run in the same order as they are registered by calls to load.action(). The callback may return a promise that is used to determine if the callback has succeeded or failed.

load.action(async function(){
  //This will run first during the run phase    
});

Registers the given callback as a named action of the script with the given name. The actions are run in the same order as they are registered by calls to load.action() or as defined in the run logic. The callback may return a promise that is used to determine if the callback has succeeded or failed.

Example:

load.action("myFirstAction", async function(){
  //This will run first during the run phase    
});
load.action("mySecondAction",async function(){
  //This will run second during the run phase
});

Returns an object that contains all the default options that are used as options for any subsequent calls to the WebRequest constructor.

Example:

load.WebRequest.defaults.method = "POST";
const webRequest = new load.WebRequest("www.foo.bar");  
//webRequest.method === "POST"	

Creates a new WebRequest instance. You can provide the options argument to override any default options. The options must include at least a url property which is mandatory, while all the other properties are optional. Alternatively, you can call the constructor with a string argument and then this argument will be the URL.

Currently supported options are:

Example:

const webRequest = new load.WebRequest({
	url:"www.url.com"
	method: "POST",
	id: 1
});
//If you don't need to change the method (default is "GET") then you can do the following:
const webRequest = new load.WebRequest("www.url.com");

You can send a multipart web request by assigning the code object as the body of a WebRequest.

constructor(entries, boundary) : MultipartBody

Creates a multipart body object with the given entries. The optional boundary argument are used to separate the entries within the sent body. The entries array should contain at least one of the following entry objects:

• MultipartBody.StringEntry

  Represents an entry of a single string.

  constructor(name, value): StringEntry. Creates a string entry object based on the given name and _value.

• MultipartBody.FileEntry

  Represents a file entry within a multipart request.

  constructor(name, filePath, contentType, fileName): FileEntry. Creates a file entry object based on the given name and filePath. You can specify the content type using the contentType argument. If content type was not specified, text/plain is used. You can specify the file name of the sent file using the fileName argument. If the file name is not specified it is extracted from the filePath argument.

Example:

new load.WebRequest({
        url: "http://someHostName", 
        method: "POST",
        headers: {
            "Accept-Encoding": "gzip, deflate, sdch",
        },
        body: new load.MultipartBody([
                new load.MultipartBody.StringEntry("entry", "some text"),
                new load.MultipartBody.FileEntry("name_of_files",
                    "test.json",
                    "text/plain",  // Content-Type property, optional, default is 'text/plain'
                    "newFile.json" // filename property, optional, default is the file name
                )
            ],
            "---myBoundary---")// Boundary property, optional, randomly generated if not supplied
    }).sendSync();

Alternatively, you can use an array containing the part type (string or file), and the rest of the relevant constructor arguments. For example, the definitions are equivalent in each of these two code examples:

new load.MultipartBody([
                new load.MultipartBody.StringEntry("myName", "myText")
                ]);

new load.MultipartBody([
                ["string","myName", "myText"]
                ]);

The synchronous version of send. When called, the script execution is blocked until a response is returned.

Returns the resulting WebResponse object, or throws an exception if an error occurs and the error is not handled by the user by means of an error handler.

HTTP errors are handled by setting the handleHTTPError property of the WebRequest.

The possible values are:

Examples:

• No error handling:

  const request = new load.WebRequest({
          url: "http://myhostname.com/webgui", 
          method: "GET",
          headers: {
  		"Referer": "",
  		"Upgrade-Insecure-Requests": "1"
          	}
  });
  const response = request.sendSync();7,

• Handle Http error:

  const request4 = new load.WebRequest({
          url: "http://myhostname.com/cgi-bin/print_request.asp", 
          method: "POST",
          headers: {
  		"Referer": "http://myhostname.com/JSON/test_json.html",
  		"Origin": "http://myhostname.com",
  		"Upgrade-Insecure-Requests": "1",
  		"Content-Type": "application/x-www-form-urlencoded"
  		},
  		body: {
   			"email" : "devweb_forum@anyco.com",
  			"media : "2012-11-17T04:51:06-08:00",
  			"author_id : "32856507@N32856507"
  		},
  	 	handleHTTPError: (webResponse) =>{
  			if (webResponse.status === 404){
  				return false; //We can continue, its fine.
  			}
  		}				
  });
  const response4 = request4.sendSync();

Sends the request to the defined URL (see constructor) and returns a promise which is resolved with a WebResponse object or rejected with an unhandled error.

Example:

const webRequest = new load.WebRequest("www.url.com");
webRequest.send().then(function(response) {
			//Do something with the response
}).catch(function(error) {
			//Handle the error or throw it 
});

You can use the JavaScript Promise constructs to control the asynchronous nature of the requests.

For example, the following code sends 3 simultaneous requests:

Promise.all([
	(new load.WebRequest("www.first.com")).send(),
	(new load.WebRequest("www.second.com")).send(),
	(new load.WebRequest("www.third.com")).send()
]).then((results)=>{
	//This will be called when all 3 requests return
	//Do something with all 3 results
});			

Checks if the given expression matches a substring within the body.

expression can be either a string or a regular expression.

Returns true if the expression was found in the response body and false otherwise.

Example:

const response = request.sendSync();
if (response.textCheck("Web Tours")){
    	load.log("Success!");\
} else {
	load.log("Failure!");
}

Creates a new WebSocket instance. The mandatory options argument must include at least the url and the onMessage properties, all the other properties are optional.

The created WebSocket instance has an automatically generated and unique id (string) property indicating the connection number.

The supported options are:

Example:

 let messageHandler = function (message) {
      load.log(`Received message ${message.data}, socket id ${socket.id}`, load.LogLevel.info);
    }

    let errorHandler = function (err) {
        load.log('Socket error: ' + JSON.stringify(err), load.LogLevel.error);
    }

    let openHandler = function (response) {
      load.log(`Socket id: ${response.id} opened. Status: ${response.status}`, load.LogLevel.info);
    }

    let closeHandler = function (code) {
      load.log(`Socket id ${socket.id} closed, message: ${code}`, load.LogLevel.info);
    }

    const socket = new load.WebSocket({
        url: "ws://myserver:8080",
        onMessage: messageHandler,
        onError: errorHandler,
        onOpen: openHandler,
        onClose: closeHandler
    });

Opens the WebSocket connection to the remote host. After calling this function, it is possible to send and receive messages.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message)=>{ load.log(message.data); },
});

socket.open();

Sends the data to the connected server. To send a binary message, pass a Node.js Buffer object as data.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message)=>{ load.log(message.data); },
});
socket.open();

socket.send("ping");

The supported options are:

Sends the message specified in data, or the content of the file specified in dataPath, to the connected server. data argument and dataPath property are mutually exclusive, but one of them must be specified.

If both data argument and dataPath property are specified, only data argument is considered.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message)=>{ load.log(message.dataPath); },
});
socket.open();

socket.send({dataPath: "c:\\myImg.png", isBinary:true});

Closes the connection to the server. If the optional code and reason arguments are provided, then the connection is closed with given code and reason.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message)=>{load.log(message);},
});
socket.open();

socket.send("ping", false);
socket.close();

Returns a promise that is resolved only when continue is called on the WebSocket or when the timeout has expired.

The timeout is given in milliseconds:

• Default: 120000 milliseconds
• Unlimited: Use -1

This function can be used to asynchronously wait until some other event happens in the system. If the timeout expires before continue has been called, the returned promise is rejected.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message) => {
        if (message.data === 'myMessage'){
          socket.continue();
        }
    },
});
socket.open();
socket.send("ping", false);
await socket.waitForData(6000);
socket.close();

Resolves a promise previously created by waitForData.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message) => {
        if (message.data === 'myMessage'){
          socket.continue();
        }
    },
});
socket.open();
socket.send("ping", false);
socket.waitForData(60000);
socket.close();

Blocks the Vuser script until the connection to the server is closed.

The timeout is given in milliseconds:

• Default: 120000 milliseconds
• Unlimited: Use -1

Closure can occur due to the following:

• The server has closed the connection.
• close was called on the WebSocket.
• The optional timeout argument has passed and has expired.

Example:

const socket = new load.WebSocket({
    url: "ws://ws.myhostname.com:8080",
    onMessage: (message) => {
        if (message.data === 'end'){
          socket.close();
        }
    },
});
socket.open();
socket.send("ping", false);
socket.waitForClose(3000);

Creates a new GrpcClient instance. The options must include at least a host property; all other properties are optional.

Alternatively, you can call the constructor with a string argument, and then this argument will be the host.

Currently supported options are:

Example:

 const client = new load.GrpcClient({
        host: "myHost",
        isInsecure: true,
        defaults: {
            headers: {
                "User-Agent": "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36 Edge/18.18363"
            }
        }
    });

    const client = new load.GrpcClient('myHost');

Creates a new gRPC unary service method object instance. You can provide the options argument, which override any client default options.

Currently supported options are:

Example:

const client = new load.GrpcClient('myHost');
const helloMethod = client.unaryRequest({
        id: 1,
        method: "package.Service.Hello",
        protoFile: "./proto/hello.proto"
    });
const response = helloMethod.sendSync();

Creates a new instance of a gRPC client stream-service method object. You can provide the options argument, which override any client default options.

Currently supported options are:

Example:

const client = new load.GrpcClient('myHost');
const recordRoute = client.clientStreamRequest({
        id: 3,
        method: "routeguide.RouteGuide.RecordRoute",
        protoFile: "./proto/route_guide.proto",
        bodyArray: [{
            "latitude": 407838351,
            "longitude": -746143763
        },
        {
            "latitude": 415736605,
            "longitude": -742847522
        }]
    });
const response = recordRoute.sendSync();

Creates a new instance of a gRPC server stream-service method object. You can provide the options argument, which override any client default options.

Currently supported options are:

Example:

const client = new load.GrpcClient('myHost');
const lotsOfReplies = client.serverStreamRequest({
      id: 1,
      method: "hello.HelloService.LotsOfReplies",
      protoFile: "./proto/hello.proto",
      body: {
        "greeting": `DevWeb hello`
      },
      extractors: [
        new load.JsonPathExtractor("myReply", "$[0].reply")
      ],  
    });
const response = lotsOfReplies.sendSync();

Creates a new instance of a gRPC bidirectional stream service method object. You can provide the options argument, which will override any client default options.

Currently supported options are:

Example:

const client = new load.GrpcClient('myHost');
const recordRoute = client.biDirectionalStreamRequest({
        id: 3,
        method: "routeguide.RouteGuide.RecordRoute",
        protoFile: "./proto/route_guide.proto",
        bodyArray: [{
            "latitude": 407838351,
            "longitude": -746143763
        },
        {
            "latitude": 415736605,
            "longitude": -742847522
        }]
    });
const response = recordRoute.sendSync();

Performs unary RPC to a gRPC server. When called, the script execution is blocked until a response or error is returned. Returns the resulting GrpcResponse object, or throws an exception.

Example:

const client = new load.GrpcClient('myHost');
const helloMethod = client.unaryRequest({
        id: 1,
        method: "package.Service.Hello",
        protoFile: "./proto/hello.proto"
    });

const response = helloMethod.sendSync();

Performs async unary RPC to a gRPC server, and returns a promise which is resolved with a GrpcResponse object, or rejected with an unhandled error.

Example:

const client = new load.GrpcClient('myHost');
const helloMethod = client.unaryRequest({
    id: 1,
    method: "package.Service.Hello",
    protoFile: "./proto/hello.proto"
});

helloMethod.send().then(function(response) {
    //Do something with the response  
}).catch(function(error) {
    //Handle the error or throw it
});

Performs gRPC client-streaming RPC to a gRPC server. When called, the script execution is blocked until a response or error is returned. Returns the resulting GrpcResponse object or throws an exception.

Example:

const client = new load.GrpcClient('myHost');
const route = client.clientStreamRequest({
        id: 1,
        method: "routeguide.RouteGuide.RecordRoute",
        protoFile: "./proto/route_guide.proto",
        bodyArray: [{
            "latitude": 407838351,
            "longitude": -746143763
        },
        {
            "latitude": 415736605,
            "longitude": -742847522
        }],
    });

const response = route.sendSync();

Performs async gRPC client streaming to a gRPC server, and returns a promise which is resolved with a GrpcResponse object, or rejected with an unhandled error.

Example:

const client = new load.GrpcClient('myHost');
const route = client.clientStreamRequest({
        id: 1,
        method: "routeguide.RouteGuide.RecordRoute",
        protoFile: "./proto/route_guide.proto",
        bodyArray: [{
            "latitude": 407838351,
            "longitude": -746143763
        },
        {
            "latitude": 415736605,
            "longitude": -742847522
        }],
    });

route.send().then(function(response) {
    //Do something with the response  
}).catch(function(error) {
    //Handle the error or throw it
});

Performs gRPC server-streaming RPC to a gRPC server. When called, the script execution is blocked until a response or error is returned. Returns the resulting GrpcResponse object or throws an exception.

Example:

const client = new load.GrpcClient('myHost');
const features = client.serverStreamRequest({
        id: 1,
        method: "routeguide.RouteGuide.ListFeatures",
        protoFile: "./proto/route_guide.proto",
        body: {
            "lo": { "latitude":"407838351", "longitude":"-746143763" },
            "hi": { "latitude":"413700272", "longitude":"-742135189" }
        }
    });

const response = features.sendSync();

Performs async gRPC server streaming to a gRPC server, and returns a promise which is resolved with a GrpcResponse object, or rejected with an unhandled error.

Example:

const client = new load.GrpcClient('myHost');
const features = client.serverStreamRequest({
        id: 1,
        method: "routeguide.RouteGuide.ListFeatures",
        protoFile: "./proto/route_guide.proto",
        body: {
            "lo": { "latitude":"407838351", "longitude":"-746143763" },
            "hi": { "latitude":"413700272", "longitude":"-742135189" }
        }
    });

features.send().then(function(response) {
    //Do something with the response  
}).catch(function(error) {
    //Handle the error or throw it
});

Performs gRPC bidirectional streaming RPC with a gRPC server. When called, the script execution is blocked until a response or error is returned. Returns the resulting GrpcResponse object, or throws an exception.

Example:

const client = new load.GrpcClient('myHost');
const features = client.biDirectionalStreamRequest({
id: 1,
method: "routeguide.RouteGuide.ListFeatures",
protoFile: "./proto/route_guide.proto",
body: {
"lo": { "latitude":"407838351", "longitude":"-746143763" },
"hi": { "latitude":"413700272", "longitude":"-742135189" }
}
});
const response = features.sendSync();

Performs async gRPC bidirectional streaming with a gRPC server, and returns a promise which is resolved with a GrpcResponse object, or rejected with an unhandled error.

Example:

const client = new load.GrpcClient('myHost');
const features = client.biDirectionalStreamRequest({
id: 1,
method: "routeguide.RouteGuide.ListFeatures",
protoFile: "./proto/route_guide.proto",
body: {
"lo": { "latitude":"407838351", "longitude":"-746143763" },
"hi": { "latitude":"413700272", "longitude":"-742135189" }
}
});
features.send().then(function(response) {
//Do something with the response
}).catch(function(error) {
//Handle the error or throw it
});

This constructor creates an extractor object for the boundary extractor. It searches the headers and the body of the response for any string that begins with leftBoundary and terminates with rightBoundary, and returns the first matching string between the two boundaries. If nothing is found, null is returned.

For additional options, use the next constructor version, below.

Creates the same ExtractorObject as in the previous call (above), but allows some additional options.

Additional options include:

Example:

const boundaryRule1 = new load.BoundaryExtractor("title", "<title>", "</title>");
const boundaryRule2 = new load.BoundaryExtractor("thirdImage", {
  leftBoundary: "<title>",
  rightBoundary: "</title>",
  occurrence: load.ExtractorOccurrenceType.Last
});
const boundaryRule3 = new load.BoundaryExtractor("someBase64", {
  leftBoundary: 'base64Encoded:"',
  rightBoundary: '",',
  converters: "base64Decode", //The extracted value will be automatically decoded from base64
  transform: (value, request, response) => { 
    if (response.status === 500) { //For response status code 500, we want the extracted value to be "error"
      return "error";
    }
    return value
  }
});
const myPageRequest = new load.WebRequest({
  url: "http://myServer.com/main/product.html",
  method: "GET",
  returnBody: false, //You don't need to return the body to get the extractors
  extractors: [
    boundaryRule1, //Extract the title of the page
    boundaryRule3  //Extract a value and then decode it from base64
  ]
});
const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
load.log(`The title of the page is ${myResponse.extractors.title}`);

load.log(`The third image is ${myResponse.extractors.thirdImage}`);

This constructor creates an extractor object for the regular expression extractor. It searches the headers and the body of the response for a match of the given regular expression, and returns the first match of the first capture group. If nothing is found, null is returned.

For more information about regular expression syntax, see the GitHub Google re2 documentation: Syntax

For additional options, use the next constructor version, below.

Creates the same ExtractorObject as in the previous call (above), but allows some additional options.

Additional options include:

Example:

 const regexpRule1 = new load.RegexpExtractor("title","<title>(.*?)</title>","i");
 const regexpRule2 = new load.RegexpExtractor("fullTitle",{
   expression: "<title>(.*?)</title>",
   flags: "i",
   groupNumber: 0
 });
 const regexpRule3 = new load.RegexpExtractor("someImage",{
   expression:"<img>(.*?)</img>",
   flags:"i",
   occurrence:2,
   includeRedirections:true
   });
 const regexpRule4 = new load.RegexpExtractor("someBase64",{
   expression:"<myBase64htmlEncoded>(.*?)</myBase64htmlEncoded>",
   converters:"base64Decode,htmlUnescape",
   transform: (value, request, response)=>{
      if (request.url === "server1"){
        return "fixed "+value;
      }
      return value
     }
   });
 const myPageRequest = new load.WebRequest({ 
      url: "http://myServer.com/main/product.html",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors:[
          regexpRule1,  //Extract only the title of the page (group 0)
          regexpRule2,  //Extract the entire expression and all the groups
          regexpRule3,  //Extract the first group of the third occurrence including redirections
          regexpRule4   //Extract the value then convert it from base64 and unescape the HTML, then if the url was "server1" add a prefix to the value 
        ]
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor.
load.log(`The title of the page is ${myResponse.extractors.title}`);

//Since we want only the title, we will take the extractor result of the first group
load.log(`The title of the page is ${myResponse.extractors.fullTitle.groups[0]}`);
//We can get the full match as well
load.log(`The full matched expression is ${myResponse.extractors.fullTitle.full}`); //This will log <title>Products</title> to the log
//We can retrieve a particular occurrence
load.log(`The third image of the page is ${myResponse.extractors.someImage}`);

This constructor creates an extractor object for the JSON path extractor. It searches the body of the response (if it is a valid JSON) and returns the matching objects:

• If nothing is found, null is returned.
• If returnMultipleValues is unspecified or is false, it returns only the first result; otherwise, it returns an array with all the results.

For more information on the JSON path extractor, refer to the next constructor version.

This constructor creates an extractor object for the JSON path extractor. It searches the body of the response (if it is a valid JSON) and returns the matching objects(s). If nothing is found then null is returned.

options can include:

Currently supported syntax for JSON path:

Example:

const productNameExtractor = new load.JsonPathExtractor("productName","$.products[0].name");
 const myPageRequest = new load.WebRequest({ 
      url: "http://myServer.com/main/products.json",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors: productNameExtractor //Extract the name of the first product
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
load.log(`The name of the first product is ${myResponse.extractors.productName}`); 

This constructor creates an extractor object for the XPath extractor. It searches the body of the response (if it is a valid XML) and returns the matching objects(s). If nothing is found, then null is returned.

If returnMultipleValues is unspecified or is false, it returns only the first result; otherwise it returns an array with all the results.

For more information, refer to the next constructor version.

This constructor creates an extractor object for the XPath extractor. It searches the body of the response (if it is a valid XML) and returns the matching objects(s). If nothing is found, then null is returned.

options can include:

Example:

 const productNameExtractor = new load.XpathExtractor("productName","/products[0]/name");
 const productNameExtractorSingle = new load.XpathExtractor("firstProductName",{
    path: "/products[*]",
    returnMultipleValues: false
 });

 const myPageRequest = new load.WebRequest({ 
      url: "http://myServer.com/main/products.xml",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors:[
          productNameExtractor, //Extract the name of the first product
          productNameExtractorSingle //Extract the name of the first product 
        ]
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
load.log(`The name of the first product is ${myResponse.extractors.productName}`);

This constructor creates an extractor object for the text check extractor. It returns true if the given text was found in the response, based on the scope argument. If the given text is not found then false is returned.

For more information, refer to the next constructor version.

This constructor creates an extractor object for the text check extractor. It returns true if the given text was found in the response, based on the scope argument. If the given text is not found then false is returned.

options can include:

Example:

const textCheck1 = new load.TextCheckExtractor("checkBody","hello");
 const textCheck2 = new load.TextCheckExtractor("checkAll",{
   text: "world",
   scope: load.ExtractorScope.All,
   failOn: false
 });

 const myPageRequest = new load.WebRequest({
      url: "http://myServer.com/main/products.json",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors:[
          textCheck1, //Check that response body contains "hello"
          textCheck2  //Check both the body and the headers for the word "world" but fail the iteration if the word isn't found
        ]
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
if (myResponse.extractors.checkBody){
    load.log(`The world "hello" was found in the response body`);
}

This constructor creates an extractor object for the HTML extractor. It searches the body of the response (if it is a valid HTML) and returns all objects matching the given CSS query. If nothing is found, then null is returned.

For more information, refer to the next constructor version.

This constructor creates an extractor object for the HTML extractor. It searches the body of the response (if it is a valid HTML) and returns all objects matching the given CSS query. If nothing is found, then null is returned.

options can include:

Example:

 const productNameExtractor = new load.HtmlExtractor("productName","div[productId=3]","productName");
 const productNameExtractorSingle = new load.HtmlExtractor("lastProductName",{
   querySelector: "div",
   attributeName: "productName",
   occurrence:load.ExtractorOccurrenceType.Last
 });

 const myPageRequest = new load.WebRequest({
      id: 1,
      url: "http://myServer.com/main/products.html",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors:[
          productNameExtractor, //Extract the name of the product with id = 3 via the productName attribute
          productNameExtractorSingle //Extract the value of the productName attribute of the last div that has productName 
        ]
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
load.log(`The name of the product is ${myResponse.extractors.productName}`);

const webResponse2 = new load.WebRequest({
    id: 2,
    url: "https://myHost/auth/oauth2/grant",
    method: "GET",
    extractors: new load.HtmlExtractor("SAMLRequest", {
            "querySelector": "input[type=hidden][name=SAMLRequest]",
            "attributeName": "value"
        }),
    ],
}).sendSync();

This constructor creates an extractor object for the cookie extractor. It searches the cookies of the response with the name specified in cookieName, with domain and path as optional arguments, and returns the first matching cookie. If nothing is found then null is returned.

For additional options, use the next constructor version.

Creates the same ExtractorObject as in the previous call but allows some extra options.

options can include:

Example:

 const cookie1 = new load.CookieExtractor("myCookie1", "jsessionid", "go.mic.com");
 const cookie2 = new load.CookieExtractor("myCookie2",{
   cookieName:"jsessionid",
   path:"/",
   occurrence:load.ExtractorOccurrenceType.Last
 });

 const myPageRequest = new load.WebRequest({ 
      url: "http://myServer.com/main/product.html",
      method: "GET",
      returnBody: false, //You don't need to return the body to get the extractors
      extractors:[
          cookie1, //Extract jsessionid cookie with domain go.mic.com value
          cookie2  //Extract jsessionid cookie with path \ value
        ]
  });

const myResponse = myPageRequest.sendSync();

//The extractor result value is available under the name of the extractor
load.log(`jsessionid with domain go.mic.com ${myResponse.extractors.cookie1}`);

load.log(`jsessionid with path \ ${myResponse.extractors.cookie2}`);

Creates a new transaction with the given name.

Example:

Starts the transaction and changes its status to InProgress.

Example:

let transaction = new load.Transaction("My Transaction");
transaction.start();

Stops the transaction and changes its status to the current status of the transaction. If the optional status argument is provided, the stopped transaction will have the given status and not the current transaction status. The valid values for status are Passed and Failed and can be taken from load.TransactionStatus.Passed and load.TransactionStatus.Failed. Calling stop records the transaction duration in the duration property.

Example:

let transaction = new load.Transaction("My Transaction");
transaction.start();
						
// ... later ...
						
transaction.stop();
//transaction.duration is now assigned with the duration

Sets the transaction status and duration to the given arguments. The given status must be one of Passed/Failed (from load.TransactionStatus) and the given duration must be a non-negative number of milliseconds for the transaction duration.

Example:

let transaction = new load.Transaction("My Transaction");
transaction.set(load.TransactionStatus.Passed, 1000);
//The transaction is now considered successful and the duration is 1 second
//transaction.duration is now assigned with the duration

Updates the status, state, and duration properties of the transaction object. The transaction must be either started or ended for the call to succeed.

Returns the transaction object for piping.

Example:

let transaction = new load.Transaction("My Transaction");
transaction.start();
						
// ... later ...
						
transaction.update();
if (transaction.duration > 2000) {
	transactionStatus = load.TransactionStatus.Failed;
}
transaction.stop(transactionStatus);

The log function writes a message to the Vuser log. The optional level argument can be one of:

LogLevel.error, LogLevel.warning, LogLevel.info, LogLevel.debug, LogLevel.trace.

Example:

alias: thinkTime

Pauses the running of the script for the specified number of seconds (time can have a fractional part to simulate milliseconds).

Example:

alias: thinkTimeAsync

Pauses the running of the script for the specified number of seconds (time can have a fractional part to simulate milliseconds).

This Async version of thinkTime does not block asynchronous activities. For example, asynchronous web requests, WebSocket messaging, and SSE streaming will all continue to work while executing thinkTimeAsync.

Example:

    let T00 = new load.Transaction("Sleep");
    let T01 = new load.Transaction("Request");
    
    let webRequest = new load.WebRequest(“https://httpbin.org/delay/6”);

    T00.start();    
    T01.start();
        let webResponse = webRequest.send().then(function (response) {T01.stop()});
        await load.sleepAsync(10.5);  // Will pause the script for 10 seconds and 500 milliseconds without blocking web request execution.
        await webResponse;
    T00.stop();

A function that enables you to specify authentication parameters for HTTP requests that require authentication. The authenticationData can be an authentication record or an array of authentication records. All subsequent requests will try to apply the given authentication data to any request that requires authentication.

An authentication record has the following structure:

Example:

load.setUserCredentials({
	username: "loader",
	password: "runner",
	host:"*",
});
						
load.setUserCredentials([{
	username: "john",
	password: "smith",
	domain:"mydomain",
	host:"^mfs1*"
},{
	username: "john",
	password: "doe",
	domain:"mydomain",
	host:"^mfs2*"
])

You can set AWS credentials by passing the AWSAuthentication object to the setUserCredentials function.

constructor(providerType, options) : AWSAuthentication

Creates an AWS authentication credentials object that is used for automatic signing of web requests with the awsSigning argument.

The providerType argument is a string and can be one of:

• static (load.AWSProviderType.Static). AWS static credentials type provider. The options argument has the following properties:

  accessKeyID	string	AWS access key ID
  secretAccessKey	string	AWS secret access key
  sessionToken (optional)	string	AWS session token

• env (load.AWSProviderType.Env). Credentials retrieved from the environment variables of the running process. Environment variables used:

  * Access Key ID	AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY
  * Secret Access Key	AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY
  * Session Token	AWS_SESSION_TOKEN

  The options argument does not need to be provided.

• shared (load.AWSProviderType.Shared). Credentials retrieved from the shared credentials file. The options argument has the following properties:

  fileName (optional)	string	Path to the shared credentials file. If empty, it looks for the AWS_SHARED_CREDENTIALS_FILE environment variable. If the environment value is empty, it defaults to the current user's home directory: Linux/macOS: "$HOME/.aws/credentials" Windows: "%USERPROFILE%.aws\credentials"
  profile (optional)	string	AWS profile to extract credentials from the shared credentials file. If empty, it defaults to the environment variable AWS_PROFILE, or default if the environment variable is also not set.

Example:

 load.setUserCredentials(new load.AWSAuthentication(load.AWSProviderType.Static, {
           accessKeyID: "myKey",
           secretAccessKey: "mySecret",
       }));

    load.setUserCredentials(new load.AWSAuthentication(load.AWSProviderType.Env));

    load.setUserCredentials(new load.AWSAuthentication(load.AWSProviderType.Shared, {
        fileName: "example.ini",
    }));

A function that enables you to specify certificate and key file path for HTTPS requests that require a certificate. The files must contain PEM encoded data. The password argument is optional, and is used to read a password-protected PEM file.

All subsequent requests will try to use the given certificate with any request that requires a certificate.

Example:

   load.setUserCertificate("./cert.pem", "./key.pem");
   load.setUserCertificate("./cert.pem", "./key.pem", "myPass");

A function that enables you to stop the execution of the script.

The exitType argument is a string and can be one of the following:

You can specify an optional message argument that will be printed to the log.

Example:

load.log("Before Exit");
load.exit("stop"); //Can also use load.exit(load.ExitType.stop);
load.log("After Abort"); //This message will not be shown!

A function that enables you to unmask a masked value. The maskedValue argument is a string generated using DevWebUtils executable.

Example:

const request = new load.WebRequest({
    url: "http://someHostName",
    headers: {
        "x-secret-key": load.unmask("Tm90IHRoZSBwYXNzd29yZA==")
    }
});

const response = request.sendSync();

A function that enables you to decrypt an encrypted value. The encryptedValue argument is an encrypted string generated using DevWebUtils executable.

Example:

const request = new load.WebRequest({
    url: "http://someHostName",
    headers: {
        "x-secret-key": load.decrypt("Tm90IHRoZSBwYXNzd29yZA==")
    }
});

const response = request.sendSync();

Executes a shell command with the permissions of the DevWeb process. Returns either an ExecutionResult object for the synchronous version, or a Promise that is resolved with the ExecutionResult object for the asynchronous version.

The options argument is an object that has the following properties:

The ExecutionResult object returned has the following properties:

If an error occurs during the execution of the external command, an exception is thrown. In this case, the ExecutionResult object is sent on the content property of the exception.

You can use the short version of the function that has the signature (also see the following example):

exec(command, args):ExecutionResult

Example:

load.exec("notepad.exe",["myFile.txt"]);

const result = load.exec({
 command: "cmd.exe",
 args: ["/c","dir"],
 returnOutput: true
})

if (result.exitCode === 0) {
 load.log(`The files are ${result.output}`);
} else {
 load.log(`Error running dir ${result.message}`,load.LogLevel.error);
}

const bgPromise = load.exec({
   command: "backgroundCalculation.exe",
   isAsync: true
});
// ... rest of script ...
// at the end of the script:
await bgPromise;

await load.exec({
   command: "always_error.exe",
   isAsync: true
}).catch((error)=>{
  load.log(`The standard error data is ${error.content.error}`);
});

Creates a new timer that calls the given callback function after, at least, delay milliseconds.

It is possible to make the timer call the callback only once, or consecutively, using the appropriate methods (see below).

Stops the timer.

Example:

    load.action("Action", async function () {
        let timer = new load.Timer(() => {
                timer.stop();
        }, 5000);
        timer.startTimeout();
        await timer.wait();
    });

Starts a timer that calls the callback when the time (in milliseconds) has passed.

Each call to timer.startTimeout() must be followed by timer.wait(), or there may be undefined behavior when the timer delay has elapsed. For example, the iteration might end before the timer fired.

Example:

    load.action("Action", async function () {
        let counter = 0;
        let timer = new load.Timer(() => {
        }, 1000);
        timer.startTimeout();
        await timer.wait();
    });

Starts a timer and sets it to call the callback each time the delay (in milliseconds) has passed.

Each call to timer.startTimeout() must be followed by timer.wait(), or there may be undefined behavior when the timer delay has elapsed. For example, the iteration might end before the timer fired.

Example:

 load.action("Action", async function () {
      	 let counter = 0;
        let timer = new load.Timer(() => {
            if (counter === 4) {
               timer.stop();
            }
            counter++;
        }, 5000);
        timer.startInterval();
        await timer.wait();
    });

Waits for the timeout or interval timer to finish before allowing the iteration to continue. It must be accompanied by await, since it returns a promise.

Example:

load.action("Action", async function () {
        let counter = 0;
        let timer = new load.Timer(() => {}, 5000);
        timer.startTimeout();
        await timer.wait();
});

A set of properties of the currently running Vuser:

Example:

load.config.user.userId;   //1 for the first user

load.config.user.args["key1"];   //will return the value of key1 or undefined if not supplied
//OR
load.config.user.args.key1;   //will return the value of key1 or undefined if not supplied

A set of properties for the script:

Example:

load.config.script.name;  //"MyScript" if the script is located in C:\scripts\MyScript>
load.config.script.directory; //"C:\scripts\MyScript" if the script is located in C:\scripts\MyScript
load.config.script.fullPath;  //"C:\scripts\MyScript\main.js" if the script is located in C:\scripts\MyScript

A set of properties for the host machine that runs the script.

Example:

load.config.host.name;   //The name of the machine running the script
load.config.host.platform; // win32 (for Windows), darwin (for iOS), linux (for Linux)

An object that contains all the environment variables as key-value pairs.

The keys are case-sensitive, including on Windows.

Example:

Runtime properties for the Vuser script.

Example:

Returns the substring within the source string between leftBoundary and rightBoundary.

If leftBoundary is undefined, the beginning of the source string is used as the left boundary.

If rightBoundary is undefined, the end of the source string is used as the right boundary.

If either boundary is not found in the source string or the source string is invalid, null is returned.

Example:

load.utils.getByBoundary("<Foo>","<",">"); // returns Foo
load.utils.getByBoundary("Unbounded Foo>",undefined,">"); // returns Unbounded Foo
load.utils.getByBoundary("<Unbounded Foo","<",undefined); // returns Unbounded Foo
load.utils.getByBoundary("Some String","<",">"); //returns null

Reports a data point, with the specified name and value, to the results database. The reported value will be in the CustomDataPoints table in the results database. The timestamp and the reporting Vuser ID are automatically added.

Example:

Returns the base64 encoding of value. If options are defined, encoding is based on the options.

options can include:

Example:

let value = load.utils.base64Encode("hello");
// Output: aGVsbG8=

let word = load.utils.base64Encode("schön", { charset: "iso-8859-1" });
// Output: c2No9m4=

let test = load.utils.base64Encode("<<???>>", { base64URL: true,  noPadding: true });
// Output: PDw_Pz8-Pg

Returns the string or Buffer represented by the base64 string value. If options are defined, decoding is based on the options.

options can include:

Example:

let value = load.utils.base64Decode("aGVsbG8=");
// Output: hello

let word = load.utils.base64Decode("c2No9m4=", { charset: "iso-8859-1" });
// Output: schön

let test = load.utils.base64Decode("PDw_Pz8-Pg", { base64URL: true,  noPadding: true });
// Output: <<???>>

Returns a generated random string of size size. If options are defined, string generation is based on the options.

options can include:

Example:

let randomPattern = load.utils.randomString(35);
load.log(`randomPattern: ${randomPattern}`);
// randomPattern: fN6EgMvq8ubHvhi5vmGQPc1K8CysXsN7vqT

let randomNumber = load.utils.randomString(20, { digits: true });
load.log(`randomNumber: ${randomNumber}`);
// randomNumber: 45658007677846724341

let randomNumber = load.utils.randomString(20, { hex: true });
load.log(`randomString: ${randomNumber}`);
// randomString: 123456789abcdef

let customPattern = load.utils.randomString(15, { custom: "ABCDEFGHIJKLMNOPQRSTUVWXYZ" });
load.log(`customPattern: ${customPattern}`);
// customPattern: JRGFQGCDRWOEBAD

Returns a generated v4 uuid string, based on RFC 4122 and DCE 1.1: Authentication and Security Services.

Example:

Returns cryptographic hash computation of input string according to selected algorithm.

Supported algorithm types are: md5, sha1, sha256, sha384, sha512

Supported outputEncoding types are:

Example:

let signing = load.utils.hash(load.HashAlgorithm.sha256, "my text");

let myHash = load.utils.hash(load.HashAlgorithm.sha256, "my text", load.HashOutputEncoding.base64RawURL);

Same as hash(algorithm, input, outputEncoding) except algorithm and outputEncoding are provided as an object for the options.

Example:

let signing = load.utils.hash("my text",{
  algorithm: load.HashAlgorithm.sha256
});

let myHash = load.utils.hash("my text",{
  algorithm: load.HashAlgorithm.sha256,
  outputEncoding: load.HashOutputEncoding.base64RawURL
});

Returns cryptographic keyed hash (HMAC) computation of input string according to selected algorithm.

Supported algorithm types are: md5, sha1, sha256, sha384, sha512

Supported outputEncoding types are:

Example:

let signing = load.utils.hmac(load.HashAlgorithm.sha256, "my_big_secret", "hello world!");

let myHmac = load.utils.hmac(load.HashAlgorithm.sha256, "my_big_secret", "hello world!", load.HashOutputEncoding.base64RawURL);

Same as hmac(algorithm, secret, input, outputEncoding) except algorithm, secret, and outputEncoding are provided as an object for the options.

Example:

let signing = load.utils.hmac("hello world!",{
  algorithm: load.HashAlgorithm.sha256,
 secret: "my_big_secret"
});

let myHmac = load.utils.hmac("hello world!",{
  algorithm: load.HashAlgorithm.sha256,
  secret: "my_big_secret",
  outputEncoding: load.HashOutputEncoding.base64RawURL
});

Returns a SAML encoded string of value. The SAML message must be deflated, and base64 encoded, before sending as part of the WebRequest.

Example:

let samlMessage = `<samlp:AuthnRequest xmlns:samlp=\"urn:oasis:names:tc:SAML:2.0:protocol\" xmlns:saml=\"urn:oasis:names:tc:SAML:2.0:assertion\" ID=\"ONELOGIN_809707f0030a5d00620c9d9df97f627afe9dcc24\" Version=\"2.0\" ProviderName=\"SP test\" IssueInstant=\"2014-07-16T23:52:45Z\" Destination=\"http://idp.example.com/SSOService.php\" ProtocolBinding=\"urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST\" AssertionConsumerServiceURL=\"http://sp.example.com/demo1/index.php?acs\">
                      <saml:Issuer>http://sp.example.com/demo1/metadata.php</saml:Issuer>
                      <samlp:NameIDPolicy Format=\"urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress\" AllowCreate=\"true\"/>
                      <samlp:RequestedAuthnContext Comparison=\"exact\">
                        <saml:AuthnContextClassRef>urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport</saml:AuthnContextClassRef>
                      </samlp:RequestedAuthnContext>
                      </samlp:AuthnRequest>`;
let samlEncode = load.utils.samlEncode(samlMessage);
load.log(`samlEncode: ${samlEncode}`);

Returns a time-based one-time password (TOTP) token with default values: 6 digits based on the SHA1 algorithm.

The TOTP function uses a cryptographic hashing algorithm (default is SHA1) to generate a token based on a secret (in base32 encoded format) and timestamp (Unix time in milliseconds).

See also https://datatracker.ietf.org/doc/html/rfc6238.

Example:

//base32 encoded string: "12345678901234567890"; 
let secret = "GEZDGNBVGY3TQOJQGEZDGNBVGY3TQOJQ";

totpTimestamp = Date.now();
load.log(`Time now is: ${totpTimestamp}`);

let key = load.utils.totp(secret, totpTimestamp);
load.log(`TOTP Token: ${key}`);

Same as totp(secret, timestamp) but with user-defined TOTP options. The cryptographic hash algorithm is provided as a parameter.

Supported options types:

Example:

//base32 encoded string: "12345678901234567890"; 
let secret = "GEZDGNBVGY3TQOJQGEZDGNBVGY3TQOJQ";

totpTimestamp = Date.now();
load.log(`Time now is: ${totpTimestamp}`);

let key = load.utils.totp(_secret, totpTimestamp, {digits: 8, algorithm: load.HashAlgorithm.sha512});
load.log(`TOTP Token: ${key}`);

It is possible to pass as many (function, options) pairs as needed. A function argument can be the name of a function on the utils object, or any other function that takes a value as its first argument and returns a value.

If there is no option to pass to a specific function, omit the argument altogether.

Runs the chain on the given value.

Returns a target host for an SRV record, according to priority and weight.

The lookup service is the implementation of an algorithm that enables the resolution of a target host, according to the DNS SRV specification.

The API uses three arguments, service, protocol, and domain, and returns hostname (location of the service) based on RFC 2782 (according to priority and weight). This is the same as the command:

If several SRV records have the same priority, then the target is selected randomly, taking into account the weight distribution.

See also https://datatracker.ietf.org/doc/html/rfc2782.

Example:

let hostname = load.net.lookupService('xmpp-service', 'tcp', 'example.com');

let request = new load.WebRequest({
    id: 1,
    url: `https://${hostname}`,
    method: `GET`
});

Returns a list of IP addresses, available on a local machine, as an array.

Example:

let IPlist = load.net.getIPList();
load.log(`${IPlist.length} IP addresses available: [${IPList}]`);

Sets an IP address for the current Vuser. It must be a valid IP, available on the local machine.

Example:

// get random IP from the list of available IP addresses

let IPlist = load.net.getIPList();
let vuserIP = IPlist[~~(Math.random() * IPlist.length)];
load.net.setIP(vuserIP)
load.log(`IP: [${vuserIP}] assigned to vuser:${load.config.user.userId}`); 

Get the IP address for the current Vuser. Can be used only when multiIP is active, or if IP was set by the setIP function.

Example:

let vuserIP = load.net.getIP()
load.log(`IP: [${vuserIP}] assigned to vuser:${load.config.user.userId}`); 

Returns an internal token with the Azure key vault options..

Example:

let token = load.azure.getToken({
    vaultName: "test",
    clientSecret: "test",
    tenantId: "test",
    clientId: "test"
    }
);

Returns the secret value from the Microsoft Azure Key Vault.

Example:

let secretValue = load.azure.getSecret({
    secret: "test",
    token: token
}
);
load.log(`secret: ${secretValue}`);

Takes a cookie object, or an array of cookie objects, and adds them to the engine. The cookies are used when needed according to the URL of the web request.

Example:

const cookie = new load.Cookie({
	name:"myCookie",
	value:"foo"
})
load.addCookies(cookie);

Takes a cookie object, or an array of cookie objects, and deletes them from the engine. No error is returned if one or more of the given cookies does not exist in the engine (meaning that they were not previously added by addCookies).

Example:

const cookie = new load.Cookie({
	name:"myCookie",
	value:"foo"
})
load.addCookies(cookie);

                    // later
						
load.deleteCookies(cookie);

Deletes all the cookies that were added to the engine by addCookies.

Example:

const cookie = new load.Cookie({
	name:"myCookie",
	value:"foo"
})
load.addCookies(cookie);

//later
                  
load.clearCookies();

Creates a cookie object that can be used in a setCookie call. The mandatory options argument can be an object with the cookie fields or a string. See definitions in the Set-Cookie command definition.

If an object is provided, it can have the following fields:

If a string is provided it should be in the Set-Cookie format such as:

Example:

const cookie1 = new load.Cookie({
                    name:"myCookie",
                    value:"foo"
                    domain: “somecompany.co.uk”
});
                    
const cookie2 = new load.Cookie("qwerty=219ffwef9w0f; Domain=somecompany.co.uk; Path=/; Expires=Wed, 30 Aug 2019 00:00:00 GMT");

Connects to a VTS server using the connection parameters defined in options. Returns a VTSClient object, or throws an exception if the connection fails. You can call vtsConnect multiple times for different servers or with different user credentials.

Possible options are:

Example:

const vtsClient = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
});

Returns a reference to a column in the VTS server with the specified column name. It does not verify that the column actually exists.

Example:

const vtsClient = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
});
const myColumn = vtsClient.getColumn("myColumn");

Returns a reference to a row in the VTS server with the given row index. The index must not be a negative number. This constructor does not verify that the row actually exists.

Example:

const vtsClient = load.vtsConnect({
server: "http://my.server.com",
port: 1234
});
const myRow = vtsClient.getRow(2);

Creates a column on the VTS server and returns a reference to the created column.

const vtsClient = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
});
const myColumn = vtsClient.createColumn("myColumn");

Pops the first fields from specified columns. columnNames is an array of the column names that are popped. If columnNames is not specified, all the columns are popped.

Returns:

• an array of the values from the popped columns.
• an object where each property key corresponds to a column name, and each property value corresponds to the database value.

Example:

const vtsClient = load.vtsConnect({
server: "http://my.server.com",
port: 1234
});
const columnValues = vtsClient.popColumns(["col1","col2"]);
load.log(`The value of col1 is ${columnValues.col1}`);

Retrieves the first field from the specified columns and moves the value to the bottom. columnNames is an array of the column names that are rotated. If columnNames is not specified, all the columns are rotated.

placementType must be one of the following:

Returns an object where each property key corresponds to a column name, and each property value corresponds to the database value.

Example:

const vtsClient = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
});
const columnValues = vtsClient.rotateColumns(["col1","col2"], load.VTSPlacementType.unique);
load.log(`The value of col1 is ${columnValues.col1}`);

Sets the data given in values into the columns given by columnNames. The number of columns must be identical to the number of values provided.

placementType must be one of the following:

Example:

const vtsClient = load.vtsConnect({
                    server: "http://my.server.com",
                    port: 1234
                    });
                    const columnValues = vtsClient.setValues(["col1","col2"], ["myValue1","myValue2"], load.VTSPlacementType.sameRow);

Replaces the given newValue in all the columns that were specified by columnNames and where the current field value equals existingValue.

Example:

const vtsClient = load.vtsConnect({
         server: "http://my.server.com",
         port: 1234
       });
 vtsClient.replaceExistingValue(["col1","col2"], "myNewValue", "oldValue");

Searches for a row containing specific values in specific columns. If more than one row meets the condition, the data from only one random row is returned.

Example:

const vtsClient = load.vtsConnect({
         server: "http://my.server.com",
         port: 1234
       });
const row = vtsClient.searchRows(["userID"], ["junior5"], ",");
load.log(`row: ${row.useHash}, ${row.userID}, ${row.userPWD}`) // e.g row: 3, junior5, 12345

The client that contains this row.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                    
                    myColumn.client.createColumn("newColumn");

Clears all data in a column.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                   
myColumn.clear();

Returns the number of fields that contain data in a column.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                   
const size = myColumn.size();
load.log(`The size of someColumn is ${size}`);

Creates an index on a column.

• If a column is not indexed, the time required to execute addUnique() increases with the number of rows.
• If the column is indexed, the time for send if unique operations is constant.

For large databases, we recommend that you index columns on which you want to perform unique operations.

A column is locked while an index is being built for it. Any function calls that change the column are queued until the index build completes. If the index exists, this function has no effect.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                   
myColumn.createIndex();

Deletes the index on a column.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                  
myColumn.dropIndex();

Sets the last field of a column to a value. If there is no empty field in the column, a new row is created.

If ifUnique is true, the function checks that the value does not exist in the column. If the value already exists in the column, the function has no effect.

If a column is not indexed, the time required to execute addValue() with ifUnique set to true increases with the number of rows. If the column is indexed, the time is constant.

For large databases, we recommend that you use createIndex() to index columns you want to perform this operation on.

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                   
myColumn.addValue("myValue",true); //Will add "myValue" only if it doesn't exist in the column already

Clears the data in a field within the column, as defined by the rowIndex.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                 
myColumn.clearField(3); //Will clear row 3 in this column

Changes the value in the field within the column defined by the rowIndex, by the amount passed in argument value. If the field value cannot be converted to an integer, or if there is no data in the field, the field value after the call is value.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                  
myColumn.incrementField(2, 10); //Will increment row 2 in the column by 10

Retrieves the data in a field. If there is no data in the field, the output is null.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                  
const myValue = myColumn.getFieldValue(2);

Writes the value to the field within the column defined by the rowIndex. If existingValue was specified, and the existingValue and field values match, the field value is overwritten.

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                
myColumn.setFieldValue(1, "new value");
                   
myColumn.setFieldValue(1, "even newer value","new value");

Retrieves the value from the field in the top row of the column. All fields below the first row move up one row.

For example, after the call, the value that was in the second row of the column is now in the first row, and the value that was in the third row is now in the second row. The last field in the column is cleared.

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                   
const someValue = myColumn.pop();

Retrieves the data in the first field of the column. The data is removed from the first field and moved to the bottom of the column as specified by the placementType parameter. If there is no data in a cell, the output is null.

placementType must be one of the following:

Example:

const myColumn = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getColumn("someColumn");
                 
const someValue = myColumn.rotate(load.VTSPlacementType.stacked);

The client that contains this row.

Example:

const myRow = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getRow(1);
                    
myRow.client.createColumn("newColumn");

Clears the values from all fields in a row. If a cell has a value, clear() sets the value to an empty string. Cells with no value are not affected. Querying such cells returns null before and after the call to clear().

Example:

const myRow = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getRow(1);
                 
                    myRow.clear();

Retrieves the data in a row as an object, which has a property that corresponds to each column name. If there is no data in a field, the corresponding output is null.

Example:

const myRow = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getRow(1);
                    
const values = myRow.getValues();
load.log(`The value of myColumn is ${values.myColumn}`);

Sets the data given in values into the columns given by columnNames. The number of columns must be identical to the number of values provided.

placementType must be one of the following:

Example:

const myRow = load.vtsConnect({
	server: "http://my.server.com",
	port: 1234
}).getRow(1);
myRow.setValues(["col1","col2"],["value1","value2"]);

Creates a file object that performs operations on a file at the given path. The engine controls the file lifecycle, therefore you do not need to open/close the file. The path can be an absolute path, or a relative path to the script directory.

Example:

Reads the file and returns the read value based on the given options.

Possible options are:

Returns an object that has two properties:

• content: The entire content of the read file. This property is available only when returnContent is set to true in the options. If isBinaryContent is set to true, then the returned value is a binary representation of the file inside a Buffer object.

• extractors: The extracted results of the given extractors. See Extractor results for more details.

Example:

const myFile = new load.File('data.xml');
const readResult = myFile.read({
  extractors:[
    new load.RegexpExtractor("title","<customerCode>(.*?)</customerCode>","i")
  ]
});

load.log(`The customer code in data.xml is ${readResult.extractors.title}`);

Appends the content to the end of the file. If the content is a Node.js buffer, the appended content will be binary.

Example:

const myFile = new load.File('results.txt');
myFile.append(`vuser ${load.config.user.userId} passed the first page`);

Writes the content to the file, overwriting the existing text in the file. If the content is a Node.js buffer, the written content will be binary.

Example:

 const myFile = new load.File('results.txt');
 myFile.write(`vuser ${load.config.user.userId} passed the first page`);

Checks if the specified file exists.

Example:

const myFile = new load.File('results.txt');
myFile.write(`vuser ${load.config.user.userId} passed the first page`);
const isFileExists = myFile.isExists(); // returns true, if the file exists at the given moment.

Creates a new SSE instance. The mandatory options arguments must include url and onMessage. All other arguments are optional.

The supported options are:

The created SSE instance has an automatically generated and unique id (string) property, indicating the connection number.

Example:

let messageHandler = function (message) {
load.log(`Message received through an event source: >>>>>>>\r\n${message}\r\n<<<<<<<`,load.LogLevel.info);
}
let errorHandler = function (error) {
load.log(error, load.LogLevel.error);
}
let openHandler = function(response){
load.log(`Connection with the event source [${response.id}] is open`);
load.log(JSON.stringify(response,null,4))
};
const sse = new load.SSE({
url: http://myserver:8080,
headers: {
"Token": load.utils.uuid(),
"User-Agent": "DevWeb Vuser"
},
onMessage: messageHandler,
onError: errorHandler,
onOpen: openHandler
});
 
sse.open();
await load.sleepAsync(30);
sse.close();

Opens the SSE connection to the remote host.

The HTTP request sent to the server contains Accept: text/event-stream header, which indicates that the client can receive the events stream.

After calling this function it is possible to receive events from the server.

Closes the SSE connection to the server.