Create an Integration Point between APM and UCMDB

1. Log in to UCMDB as an administrator.

2. Navigate to Data Flow Management > Integration Studio.

   UCMDB displays a list of existing integration points.

3. Click the New Integration Point button.

   The New Integration Point dialog box opens.

4. Complete the Integration Properties and Adapter Properties fields as shown in the following table:

   Field (*Required)	Description
   Integration Properties section
   *Integration Name	Type the name (unique key) of the integration point.
   Integration Description	Type a description of the current integration point.
   *Adapter	Click the Select Adapter button and select Software Products > APM > APM Push Adapter from the Select Adapter dialog
   *Is Integration Activated?	Select this option to indicate the integration point is active.
   Adapter Properties section
   *Protocol Type	Select http or https from the drop-down list
   *Hostname/IP	Type the hostname or IP Address of the PPM Server. For example, 16.166.16.16 or hostname.
   *Port	Type the communication port of the PPM Server. The default value is 80. Example: 30000
   *Path	Type the path of the PPM Server. The default value is itg.
   *Credentials ID	Click the Select Credential Id button, then select Generic Protocol or DefaultDomain > Generic Protocol in the Protocol pane, and from the Credentials list, select a credential or create a new credential that is to be used by UCMDB to access APM. To create a credential for this integration point, Click the Select Credential Id button. The Choose Credentials dialog opens. Click the Create new connection details for selected protocol type button. The Generic Protocol Parameters dialog opens. Provide values for the following fields and click OK: Network Scope: Use the default value ALL. User Label: Type a label for the credential. User Name: Provide the user name for the APM account that is to be used by UCMDB to access APM. Password: Click and provide the password for the APM account that is to be used by UCMDB to access APM. Click OK twice. Tip: Users of any of the following security groups can be used as Credentials ID: APM User APM Administrator APM Analyst
   *Data Flow Probe	The name of the Data Flow Probe/Integration service used to execute the synchronization from. Select IntegrationService for this integration. Note: If the IntegrationService option does not exist, consult with your UCMDB administrator for the best selection for your requirements.
   Additional Probes	Not required for this integration point.

   Below is an example of the completed dialog:

   

5. Click Test Connection to make sure there is a valid connection.

6. Click OK.

   The integration point is created and its details are displayed. (It is not saved to the server until you click on the OK button)

   UCMDB creates a default data push job when creating the integration point. The default data push job includes everything, it runs immediately and performs a Full Synchronization.

   Note: The first Full Synchronization may take a while to complete.

   If needed you may create or edit the existing job. To create or edit and run a customized data push job, see (Optional) Push CI Data from UCMDB to APM.

   For instructions about scheduling the data push job, see Schedule Data Push Jobs.