Run API tests with parameterization

This exercise describes how to add parameters to the Standard test you created earlier, using a single data source, output values from earlier steps, as well as multiple data sources.

Parameterize a test step from a single data source

Add parameter values to the Standard API test using data manually entered into a data table.

Add a Concatenate Strings step to your test:

  1. Start with OpenText Functional Testing open, with the Standard test selected and displayed in the Document pane.

    For more details, see Run an API test with standard activities.

  2. Add the Concatenate Strings step to your test.

    From the Toolbox pane, drag the String Manipulation > Concatenate Strings activity to the Test Flow in the canvas, above the Replace String activity.

  3. Continue with Add a data source and values:.

Add a data source and values:

  1. Select View > Data to display the Data pane.

    Then, click New Data Source > Local Table.

  2. In the New Local Table Data Source dialog, enter the Data Source name as Concatenated Strings.

  3. Click Add to add a row to the table.

    In the table, enter Prefix in the Name column, and leave the Data Type as String.

  4. Click Add again to add another row.

    Enter Suffix in the Name column, and again leave the Data Type defined as String.

  5. Click OK to return to OpenText Functional Testing. The table is added to your test, and is displayed in the Data pane, as a sub-node of the Current Test data sources:

  6. Select the Concatenated Strings node in the Data pane, and enter the following values on the right:

    Make sure that you leave spaces after Hello, Welcome, and I am running.

    Prefix Suffix
    Hello world.
    Welcome to OpenText Functional Testing.
    I am running API tests.
  7. Continue with Connect the test steps to the data source:.

Connect the test steps to the data source:

  1. In the canvas, select the Concatenate Strings step.

  2. Define the step properties in the Input/Checkpoints tab on the right as follows, for both the Prefix and Suffix values:

    1. Hover over the Value cell, and click the Link to data source button.

    2. In the Select Link Source dialog, select the Data source column option. You'll the see the Concatenated Strings table listed in the data sources below.

      Select the Concatenated Strings item, and then select the Prefix or Suffix data item on the right.

      Click OK to update the value in the Properties pane.

      When you're done, the Properties pane is updated with the links to the data table values you created earlier.

  3. Continue with Set the test iteration settings and data navigation policy.

Set the test iteration settings and data navigation policy

Define test settings for the entire test flow:

  1. In the canvas, select the Test Flow box.

  2. In the Properties pane, on the Input tab:

    • Select the 'For' Loop option.
    • In the Number of Iterations field, enter 3 for the number of iterations. This configures OpenText Functional Testing to use all three lines of the data table when running the test.

  3. In the Properties pane, on the Data Sources tab, select the Concatenated Strings data source, and then click Edit.

    In the Data Navigation dialog, ensure that the values are selected as follows:

    Start at First row
    Row 1
    Move by 1 rows Forward
    End at Last row
    Upon reaching the last row Wrap around
  4. Click OK to close the dialog.
  5. Save your test, and continue with Run your parameterized test and view results:.

Run your parameterized test and view results:

  1. Click the Run toolbar button.

  2. Ensure that the Standard test is selected, and accept the other default values.

  3. Click Run to start running the test.

    OpenText Functional Testing runs the steps in sequence, using the values in the data table for the input of the Concatenante Strings activity.

    While OpenText Functional Testing is running the test, you can see the values OpenText Functional Testing takes from the data table in the Output pane:

  4. When the test run is complete, and the run results are displayed, click through the steps in the Test flow to view the three separate iteration nodes, for the three lines in the data table.

    Click each step to view the Step details for that iteration on the right.

Back to top

Parameterize a test step from an output value

Add parameter values to the Standard API test using output from earlier steps in your test.

To parameterize the step:

  1. Continue working with OpenText Functional Testing open, with the Standard test selected and displayed in the Document pane.

    For more details, see Run an API test with standard activities.

  2. In the canvas, select the Replace String step to display the Properties pane on the right.

  3. On the Input/Checkpoints Properties pane tab, hover or click the Source string row, and then click the Link to data source button .

  4. In the Select Link Source for 'Source String' dialog that appears:

    1. Select the Available steps option at the top.
    2. Select the Concatenate Strings step on the left.
    3. Select the Result row on the right.

  5. Click OK to close the dialog, and note how the Source string value in the Properties pane is updated with a link to the output from the Concatenante Strings step.

  6. In the canvas, select the Test Flow box and set your run iterations.

    In the Properties pane, on the Input tab, ensure that 'For' Loop is selected, and the number of iterations is set to 1.

  7. Click the Run toolbar button , and then click Run to start the test run.

  8. When the test run is complete, view the run results for the Replace String step you parameterized.

    In the Test flow, click the Replace String node and view the Captured Data on the right.

    The source string value is Hello world, which is the same as the result of the previous Concatenate Strings step.

  9. Save your test and continue with Parameterize a test with multiple data sources.

Back to top

Parameterize a test with multiple data sources

Parameterize your test with custom expressions to pull step values from a variety of places, such as by entering them manually, data sources, or output values of previous steps.

This exercise describes how to create and use a custom expression for all three of these data sources.

To create a custom expression:

  1. Continue working with OpenText Functional Testing open, with the Standard test selected and displayed in the Document pane.

    For more details, see Run an API test with standard activities.

  2. In the canvas, select the Write to File step to display the Properties pane on the right.

  3. On the Input/Checkpoints Properties pane tab, hover or click the Content row, and then click the Link to data source button .

  4. In the Select Link Source for 'Source String' dialog that appears:

    1. Select the Data source column option at the top.
    2. Select the Concatenate Strings step on the left.
    3. Select Prefix on the right.

  5. Click Custom Expression on the bottom to expand the Expression area.

    Then, create the first part of the expression:

    1. Above the Expression area, click Add to add the selected Prefix parameter to the expression.

      The expression value is updated as follows:

      {DataSource.Concatenated Strings.Prefix}

    2. At the top of the dialog box, click Suffix, and then click the Add button again. OpenText Functional Testing adds the Suffix parameter to the expression.

      {DataSource.Concatenated Strings.Prefix} {DataSource.Concatenated Strings.Suffix}

  6. Enter the middle part of the expression manually, as a static text string.

    In the Expression area, type a space at the end of the current value. Then, enter was replaced by, followed by another space.

    {DataSource.Concatenated Strings.Prefix} {DataSource.Concatenated Strings.Suffix} was replaced by

  7. Add the final part of the custom expression by linking it to the output from a previous step:

    1. At the top of the dialog, select the Available steps option.
    2. Select the Replace String node on the left.
    3. Select the Result row on the right.
    4. Click Add.

    The custom expression is updated to read as follows:

    {DataSource.Concatenated Strings.Prefix} {DataSource.Concatenated Strings.Suffix} was replaced by {Step.OutputProperties.ReplaceStringActivity4.Result}

  8. Click OK to close the dialog. Note how the Content value in the Properties pane is updated with this expression.

  9. Click the Run toolbar button , and then click Run to start the test run.

  10. When the test run is complete, view the run results for the Write to File step you parameterized.

    In the Test flow, click the Write to File node and view the Captured Data on the right.

    The content written to the file is the string defined by your custom expression.

  11. Save your test and continue with other exercises in this tutorial.

Back to top

Next steps: