Name and ID of the running test.

Click the Test Name link to display the test in the Performance Test Designer window.

Displays details of the running performance test.

Displays result files for the test run. For details, see Download and upload result files.

Note: Available after the run has finished.

Opens an HTML version of the Analysis Summary report, which analyzes the data collected during the performance test run. The report provides general information about the performance test, lists statistics about the test run, and provides links to graphs containing test run data.

For more details regarding the summary report, see the LoadRunner Help Center.

Note: Available after the run has finished.

Opens the NV Insights report for the selected test run. For details, see View results offline.

Note: Available after the run has finished, and only if NV Insights is enabled and included in the performance test.

The current run state (for example Running or Down), and the name and ID of the test.

The amount of time since the test began running.

The current state of the scheduler.

How many hits (HTTP requests) there have been to the web server by Vusers during each second of the test run.

The number of Vuser errors that occurred during the test run. If there are errors, click the number of errors link to view details in the Messages view. For details, see Performance Test Run Page - Messages View.

The number of completed, successful (green) and unsuccessful (red) transactions performed during the test run. Click the transactions link to view details in the Transactions grid. For details, see Performance Test Run Page - Transactions View.

Displays the total number of Vusers in the test, and a breakdown of the current Vuser status: Not Started, Active, and Finished.

Click to display a breakdown of the statuses of the Vusers in the performance test. For details, see Performance Test Run Page - Groups View.

Opens an area below the summary area, which displays the following:

• Services Virtualization. Indicates whether services virtualization is on or off.

• Controller. The Controller being used in the test.

• User. The name of the user who is running the test.

Stop Run/Stop Now. Enables you to stop a running performance test.

• Stop Run. Stops the test gradually by moving all running Vusers to the Gradual Exiting state. For user interface details, see Stop Run dialog box.

• Stop Now. Enabled only after you click the Stop Run button. Enables you to stop the Vusers immediately.

Groups

Displays the Groups view. For details, see Performance Test Run Page - Groups View.

Transactions

Displays the Transactions view. For details, see Performance Test Run Page - Transactions View.

Messages

Displays the Messages view. For details, see Performance Test Run Page - Messages View.

Vusers Details. Displays specific details for each Vuser in the performance test, and enables you to run or stop individual Vusers irrespective of their defined schedules. For user interface details, see Vusers dialog box.

Run Vusers. Enables you to run additional Vusers during the course of a performance test. That is, you can run Vusers that are not included in the test's original defined schedule. For user interface details, see Run Vusers dialog box.

Load Generators. Enables you to manage the load generator in the performance test. For user interface details, see Load Generators dialog box.

Timeslot Duration. Enables you to extend or shorten the duration of the performance test. For user interface details, see Timeslot Duration dialog box.

Monitors. Click the arrow adjacent to the button for the following options:

• Runtime Monitors. Displays a list of monitors which are currently running during a performance test, and enables you to add, edit, and remove monitors during the run. For user interface details, see Monitor Profile Content dialog box.

• Monitor Over Firewall. Enables you to change the status of a monitor over firewall machine. For user interface details, see Monitor Over Firewall dialog box.

More. Click the arrow adjacent to the button for the following options:

• Add Group. Enables you to add a Vuser group to a running performance test, or to edit Vuser group settings during a test run. For user interface details, see Add Group dialog box.

• Edit Scheduler. Enables you to edit the scheduler during a test run. For user interface details, see Performance Test Schedule dialog box.

• View Rendezvous. Enables you to enable/disable rendezvous points defined in the Vuser scripts and to set rendezvous policies that determine how the Controller handles Vusers at a rendezvous point. For user interface details, see Rendezvous dialog box.

• Service Virtualization. Opens the Configure Service Virtualization Dialog Box. For user interface details, see Service Virtualization dialog box.

• Add run to PAL report. Opens the Select PAL Report dialog box, enabling you to add the test run data to a selected PAL report. The test run data is displayed in the Data Sources Tab. For details, see Data Sources tab.

• Runs Trend. Displays a trend graph which monitors the test runs of a selected test over time. For details, see Performance Test Designer > Test Runs Trend view / Test Runs Trend tab.

Search. Enables filtering the information being displayed in each of the views by the search string.

Click the Graphs button.

Note: Displayed by default.

• Graphs Tab

• Topology Tab

• Diagnostics Tab

Filter Measurement. Enables you to filter measurements by name for all graphs in the graphs pane.

• Show only visible. Enables you to hide the non-visible measurements from the legend.

• Has Anomalies. Enables you to display only those measurements that have an anomaly.

Configuration. Enables you to configure all graphs displayed in the display pane. The following options are available:

• Time Display. The time displayed on the x-axis.

  • Relative to Load Test start. Displays the amount of time that has elapsed since the beginning of the test (in hours, minutes, and seconds).
  • Controller clock. Displays the time on the Controller clock.

• Show Anomalies. Displays the anomalies sleeve and the plot bands for those measurements that have an anomaly.

Maximize/Minimize Graph. Enables you to maximize/minimize the graphs displayed in the graphs pane.

Enables you to filter measurements by name in the legend.

• Show only visible. Hides the non-visible measurements from the legend.

• Has Anomalies. Enables you to display only those measurements that have an anomaly.

Configure. Enables you to configure the selected graph. The following options are available:

• Scale. Scales measurements approximately so that they appear in the same range in the y-axis. This avoids measurements with smaller values appearing as flat lines with zero value. Select the desired scale:

  • Automatic. Each measurement in the graph is displayed in the scale that best suits it.
  • None. Each measurement's true values are displayed in the graph.

Duplicate. Enables you to duplicate the selected graph.

Show Anomalies. Displays the anomalies sleeve and the plot bands for those measurements that have an anomaly.

Enables you to maximize/minimize the selected graph.

When you maximize the graph, the following information is displayed:

• Expand Legend. Expands the area of the legend.

• Filter Measurement. Enables you to filter measurements in the legend.

• Show only visible. Enables you to hide the non-visible measurements from the legend.

• Has Anomalies. Enables you to display only those measurements that have an anomaly.

• Legend Options. (Displayed on left-hand side of the Name column.) The following options are available:

  • Show Favorites. Displays the measurements set as favorite.
  • Hide Visible. Hides the visible measurements on the graph.
  • Select Visible as Favorites. Saves the currently displayed measurements as favorites.

• Name. The measurement name.

  A warning icon appears next to the name of each measurement that contains an anomaly.

• Scale. The graph scale.

• Max. The measurement's maximum value.

• Min. The measurement's minimum value.

• Avg. The measurement's average value.

• Std. The measurement's standard deviation.

• Last. The measurement's last value.

• Measurement Options. (Displayed on left-hand side of the Set as Favorite icon.) The following options are available:

  • Show. Displays the measurement on the graph.

  • Hide. Hides the measurement from the graph.

  • Bold. Displays the measurement in bold.

  • Show only me. Displays the selected measurement and hides the others from the graph.

• Set as Favorite. Sets the measurement as favorite.

• <color>. Enables you to select in which color the measurement appears in the graph.

• <page list>. (Displayed only for graphs that have at least 20 measurements.) Enables you to move to the first, last, or a specific graph measurements page.

On the right of the Online Graphs pane, click and select Graphs.

On the right of the Online Graphs pane, click and select Topology.

• To ensure that SiteScope monitoring data can be displayed for the topology, ensure that the relevant SiteScope server is up and running and that connectivity has been established.

• After the test run, a snapshot of the topology is included among the run result files. For details, see Download and upload result files.

Topologies overview

On the right of the Online Graphs pane, click and select Diagnostics .

• Only enabled if your system is configured to work with Diagnostics.

• To ensure that you can view Diagnostics data during a performance test run, in the Java Settings' Java Control Panel, click the Network Settings button and select Direct Connection.

Diagnostics

The Vuser group name.

The number of Vusers that are down.

The number of Vusers that are ready to be initialized and are waiting for an available load generator, or are transferring files to the load generator. The Vusers run when the conditions set in their scheduling attributes are met.

The number of Vusers that are being initialized on the host machine.

The number of Vusers that have already performed the init section of the script and are ready to run.

The number of Vusers that are running. The Vuser script is being executed on a host machine.

The number of Vusers that have arrived at the rendezvous and are waiting to be released.

The number of Vusers that are finishing their current iteration before exiting.

The number of Vusers that have finished running, or have been stopped, and are exiting now.

The number of Vusers that have been paused.

The number of Vusers that have been stopped manually.

The number of Vusers that have finished running. The script passed.

The number of Vusers that have finished running. The script failed.

The number of Vusers for which a problem occurred.

Click the Transactions button.

The transaction name.

The number of times the transaction passed.

The number of times the transaction failed.

The number of times the transaction stopped.

The transactions success rate percentage.

The number of times per second the transaction has run.

Click the Messages button.

Group by. Enables grouping messages by Code, Message, Host, Script, or Vuser.

After you have selected a grouping, the grid displays a drilled down view. You can click a blue link to filter grid data by the selected value. For example, if data is grouped by Code and you drill down on a particular code, the grid displays all messages for the selected code.

Type. Enables filtering the messages by a specific message type:

• Errors. Usually indicates that the script failed.

• Warnings. Indicates that the Vuser encountered a problem, but that the test continued to run.

• Notifications. Provides runtime information.

• Debug. Sent only if the debugging feature is enabled in the Controller. To enable the feature, select Tools > Performance Center Controller Options > Debug Information.

Default: All Types

Vuser Log. Select a row in the grid and click Vuser Log. The Vuser activity log opens, enabling you to view a list of messages per individual Vuser. The log contains the following information:

• Activity log for Vuser. The selected Vuser whose ID is being displayed.

• Refresh. Enables you to refresh the log.

• Download log. Enables you to download the log.

• Log Message area. Displays a list of all messages received for the selected Vuser.

• Snapshot. Generates a snapshot (a graphical representation of the Web page) of the point in the test run where an error occurred. Before using this feature, you must enable the Generate snapshot on error option in the script's runtime settings. For details on the runtime settings, see Runtime settings.

Note:

• Rows cannot be selected when data is grouped.

• This option is not displayed in the offline results view.

The total number of messages received.

The type of message. For details, see Type. Enables filtering the messages by a specific message type: above.

The host that generated the message. You can click a host link to group messages by the selected host value.

The total number of messages received for the selected grouping.

Note: Displayed only when messages are grouped.

Displays the total number of Vusers for the selected grouping.

Note: Displayed only when messages are grouped.